Airtac MI16-20 Stainless Steel Mini Cylinder MI16X150SCM
The AirTAC Airtac MI16-20 Stainless Steel Mini Cylinder MI16X150SCM is a genuine double acting round-body mini air cylinder with a Ø16mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
About the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X150SCM
Delivering 100.5 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles compact automation with ease. The Ø16 mm bore uses a 1/8" port and a 6 mm piston rod with an M6x1.0 male thread. Its riveted stainless barrel and rod shrug off mild corrosion, giving it a real edge over painted alternatives in damp or washdown-prone environments.
The 150 mm stroke falls well within the 500 mm maximum, while fixed TPU bumper pads absorb the impact at stroke end. Because it yields about 5.1 kgf at 0.5 MPa, you can plan for a safe working load of roughly 60 N or lift a 5 kg part vertically with a 2:1 margin. The built-in magnet enables CMSG, DMSG and EMSG switches for position sensing.
Airtac MI16-20 Stainless Steel Mini Cylinder MI16X150SCM Technical Specifications
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI16X150SCM |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI16X150SCM
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 16 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X150SCM Is Used
Textile Loom Yarn Guide
Shifts a yarn guide carriage through a 150 mm path using a reliable 100.5 N push force, with the stainless body resisting humid textile mill environments.
Carton Flap Folder
Folds small cardboard flaps on a packaging line where the 60 N safe working load easily overcomes board resistance without crushing the carton.
Lab Sample Dispenser
Actuates a 150 mm stroke to move fluid vials into a testing station, relying on the CMSG reed switch to confirm the dispense position.
Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X150SCM the Right Cylinder?
When sizing this bore, stepping down to the Ø12 mm MI drops the 0.5 MPa push force to 56.5 N, whereas stepping up to the Ø20 mm MI increases it to 157.0 N. The CM round end cover offers a specific rear mounting and port orientation for tight spaces. If your process loses air or the valve centres, the piston will drift; these bumpers only decelerate the end of travel and act as neither a brake nor a lock. To suspend a load safely, fit an external rod lock or a pilot-operated check valve. At 150 mm of travel, keep the side-load minimal to avoid rod bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI16-20 Stainless Steel Mini Cylinder MI16X150SCM FAQ
This Ø16 mm bore cylinder features a 1/8" port and generates 100.5 N push / 86.4 N pull at 0.5 MPa, and 140.7 N push / 120.9 N pull at 0.7 MPa. Its theoretical maximum force is 20.5 kgf at 1.0 MPa.
Yes, the Ø16 mm bore adheres to ISO 6432 mounting interface dimensions, allowing it to drop into standard mini-cylinder brackets and clevises. The -S suffix denotes a built-in magnet for CMSG, DMSG and EMSG switches, and it features a CM round end cover.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI16X150SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.