Airtac MI16-20 Stainless Steel Mini Cylinder MI16X25SCM
The AirTAC Airtac MI16-20 Stainless Steel Mini Cylinder MI16X25SCM is a genuine double acting round-body mini air cylinder with a Ø16mm bore and 25mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
About the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X25SCM
Delivering 100.5 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles compact actuation with ease. The Ø16 mm bore uses a 1/8" port and a Ø6 mm piston rod, while the riveted stainless construction resists mild corrosion in damp or washdown environments better than painted alternatives.
It includes a built-in piston magnet for CMSG, DMSG or EMSG switches, and features a CM round rear cover. The fixed TPU bumper pads decelerate the stroke end to reduce impact. For practical sizing, plan for about 60 N of real work at 0.5 MPa, which means it lifts roughly 5.1 kg vertically with a 2:1 safety margin.
Airtac MI16-20 Stainless Steel Mini Cylinder MI16X25SCM Technical Specifications
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI16X25SCM |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI16X25SCM
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 16 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X25SCM Is Used
Gate Diverter Arms
Actuates sorting flaps on packaging lines, using the 100.5 N thrust to push lightweight cardboard cartons into the correct lane.
Lab Sample Ejector
Ejects filled test tubes from a carousel using the 25 mm stroke, where the stainless body withstands daily chemical wipe-downs.
Small Part Clamp
Secures plastic housings during a ultrasonic welding process, applying a safe 60 N holding force without crushing the component.
Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X25SCM the Right Cylinder?
When sizing this actuator, the Ø16 mm bore sits comfortably between the smaller Ø12 mm option (56.5 N push at 0.5 MPa) and the larger Ø20 mm model (157.0 N push). If your task demands higher kinetic energy at cycle ends, consider the MIC variant for its adjustable air cushion, as this base MI relies solely on fixed TPU bumpers. The 25 mm stroke keeps the rod compact, minimizing side-load bending risks.
Because the -S suffix equips this unit for position sensing, you can easily integrate reed or electronic switches. Note that venting or centering the directional valve will cause the piston to drift, as the bumpers only soften the end of travel rather than locking the load; add a pilot-operated check valve if you need to maintain vertical position.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI16-20 Stainless Steel Mini Cylinder MI16X25SCM FAQ
This Ø16 mm bore cylinder features a 1/8" port and a Ø6 mm rod. It generates 100.5 N push and 86.4 N pull at 0.5 MPa, 140.7 N push and 120.9 N pull at 0.7 MPa, with a theoretical maximum force of 20.5 kgf at 1.0 MPa.
Yes, the Ø16 mm dimension adheres to ISO 6432 mounting interfaces, allowing it to drop into standard mini-cylinder brackets and clevises. Additionally, the -S designation means it has an internal magnet ready for CMSG, DMSG or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI16X25SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.