Airtac MI16-20 Stainless Steel Mini Cylinder MI16X35SCA
The AirTAC Airtac MI16-20 Stainless Steel Mini Cylinder MI16X35SCA is a genuine double acting round-body mini air cylinder with a Ø16mm bore and 35mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
About the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X35SCA
Delivering 100.5 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles compact actuation with ease. The Ø16 mm bore operates on a 1/8 inch port, and the integrated piston magnet allows direct mounting of CMSG, DMSG or EMSG sensors for position feedback.
Its riveted stainless barrel and rod naturally resist mild corrosion, making it superior to painted alternatives in damp environments. The built-in fixed TPU bumper pads decelerate the piston at stroke end to reduce impact wear. For practical sizing, plan for a safe working load of about 60 N, which means it can comfortably lift a 5.1 kg component vertically with a 2:1 safety margin.
Airtac MI16-20 Stainless Steel Mini Cylinder MI16X35SCA Technical Specifications
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI16X35SCA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI16X35SCA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 16 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X35SCA Is Used
Gate Diverter Arms
Drives lightweight sorting flaps on packaging conveyors, using the CA pivot to articulate the diverter mechanism smoothly across a 35 mm stroke.
Parts Ejection
Pushes small moulded plastic components out of an extrusion die, applying a safe 60 N of working force without damaging the part surface.
Lab Sample Handling
Indexes test tubes into a washdown station, where the stainless construction prevents corrosion from repeated moisture exposure.
Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X35SCA the Right Cylinder?
When sizing this unit, the smaller Ø12 bore provides 56.5 N of push at 0.5 MPa, while stepping up to the Ø20 bore yields 157.0 N, giving you clear scaling options if your payload shifts. The CA rear pivot cover is ideal for clevis mounting on articulating linkages. Because this SKU includes the -S magnet, it is fully ready for reed or electronic position sensing.
Remember that the fixed bumpers only soften the stroke end; they do not function as a brake. If your pivot mechanism must remain locked during a sudden air loss or valve shift, the piston will drift, requiring an external pilot check valve to hold the load securely in place.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI16-20 Stainless Steel Mini Cylinder MI16X35SCA FAQ
This Ø16 mm bore cylinder features a 1/8 inch port and a Ø6 mm rod. It generates 100.5 N push and 86.4 N pull at 0.5 MPa, increasing to 140.7 N push and 120.9 N pull at 0.7 MPa. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
Yes, the Ø16 bore utilizes standard ISO 6432 mounting dimensions, so it drops directly into common mini-cylinder brackets and clevises. Additionally, the -S suffix indicates a built-in piston magnet, allowing you to mount CMSG, DMSG or EMSG electronic or reed switches along the body.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI16X35SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.