Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60CMTC
The AirTAC Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60CMTC is a genuine double acting round-body mini air cylinder with a Ø16mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
About the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60CMTC
Delivering 100.5 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles compact automation tasks with ease. The riveted barrel and piston rod resist mild corrosion, making it superior to painted alternatives in damp environments. Its 60 mm stroke operates at speeds between 30-800 mm/s, and the fixed TPU bumper pads absorb impact energy at the stroke ends without offering adjustable cushioning.
Designed with a CM round rear cover and a TC trunnion mount, it integrates smoothly into pivoting assemblies. The 1/8" port supplies air efficiently to the 16 mm bore. For practical sizing, plan for a safe working load of about 60 N, which means it can lift roughly 5.1 kg vertically with a 2:1 safety margin. Note that this specific SKU lacks a magnet, so it cannot support CMSG, DMSG or EMSG sensors.
Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60CMTC Technical Specifications
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60CMTC |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60CMTC
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60CMTC Is Used
Package Diverter
Pushes light cardboard cartons on a packaging line using its 60 mm stroke and 100.5 N thrust, with the stainless body surviving occasional washdowns.
Small Part Ejector
Ejects machined plastic components from a fixture, relying on the TC trunnion to accommodate slight angular misalignment during the push cycle.
Component Sorting Gate
Actuates a sorting flap for small electronic parts where the 5.1 kg vertical lift capacity easily manages the gate weight and pivot friction.
Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60CMTC the Right Cylinder?
When sizing this 16 mm bore, compare it against its neighbours: a 12 mm bore yields 56.5 N push at 0.5 MPa, while a 20 mm bore provides 157.0 N. If your application requires position sensing, you must select the -S magnet variant, as this configuration cannot accept a switch. The TC trunnion mounting pairs perfectly with the CM round end for articulated or pivoting loads.
Keep in mind that a standard double-acting cylinder drifts when air pressure is lost or the valve is centered, as the TPU bumpers only decelerate the stroke end and act as neither a lock nor a brake. To suspend a load safely mid-stroke, incorporate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60CMTC FAQ
This 16 mm bore cylinder features a 1/8" port and a 6 mm rod with an M6x1.0 male thread. It generates 100.5 N push and 86.4 N pull at 0.5 MPa, increasing to 140.7 N push and 120.9 N pull at 0.7 MPa. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
Yes, the 16 mm bore uses the ISO 6432 mounting interface, so it drops directly into standard mini-cylinder brackets and clevises. However, because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG magnetic switches; you would need the magnet-equipped variant for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60CMTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.