Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60R
The AirTAC Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60R is a genuine double acting round-body mini air cylinder with a Ø16mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
About the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60R
Delivering 100.5 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles a 60 mm stroke with an R-style axial-in rear port. The riveted barrel and Ø6 mm rod shrug off mild corrosion, giving it a real edge over painted alternatives in damp or washdown settings. Because it follows ISO 6432 mounting dimensions, the Ø16 bore drops directly into standard mini-cylinder brackets and clevises.
Plan for roughly 60 N of actual work at 0.5 MPa, which translates to lifting about 5.1 kg vertically with a safe 2:1 margin. Fixed TPU bumper pads soften the impact at stroke ends to decelerate the motion. Note that this specific SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors without upgrading to the -S variant.
Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60R Technical Specifications
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60R |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60R
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60R Is Used
Package Diverter Gate
Pushes lightweight cardboard cartons on a packaging line using 100.5 N of thrust, with the stainless build resisting humid warehouse environments.
Small Parts Ejector
Ejects machined plastic components from a fixture over a 60 mm travel, relying on the fixed TPU bumpers to soften the stroke-end impact.
Lab Sample Handler
Moves test tubes into a scanning station where the compact riveted round body fits tight envelopes and the R rear port simplifies plumbing.
Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60R the Right Cylinder?
When sizing this 60 mm stroke unit, consider the neighbouring bores: step down to the Ø12 bore for 56.5 N push, or step up to the Ø20 bore for 157.0 N push at 0.5 MPa. The 1/8" port and M6x1.0 male rod thread are fixed by the Ø16 bore. You can mount it via LB foot, FA flange, SDB pivot or TC trunnion, while the R back cover supplies an axial-in port orientation.
Remember that the TPU bumpers only decelerate the piston near the end of travel; they do not act as a brake. If your machine loses air or the valve centres, the rod will drift, so fit an external rod lock or pilot check valve to hold a suspended load securely. The 60 mm stroke is well within the 500 mm maximum, keeping rod bending stress low.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60R FAQ
At 0.5 MPa it provides 100.5 N push and 86.4 N pull. At 0.7 MPa it provides 140.7 N push and 120.9 N pull. The theoretical maximum force is 20.5 kgf at 1.0 MPa. The air port is 1/8 inch and the male rod thread is M6x1.0.
No, this specific SKU does not include a magnet, so it cannot host CMSG, DMSG or EMSG switches. You must select the -S magnet variant for position sensing. The unit uses fixed TPU bumper pads rather than an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60R
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.