Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60U
The AirTAC Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60U is a genuine double acting round-body mini air cylinder with a Ø16mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
About the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60U
Delivering 100.5 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles compact 60 mm strokes with ease. The riveted barrel and rod resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown environments. It conforms to the ISO 6432 mounting interface for Ø16, dropping directly into standard mini-cylinder brackets and clevises.
Equipped with fixed TPU bumper pads to decelerate the stroke end, it operates smoothly between 30-800 mm/s. For practical sizing, plan for a safe working load of about 60 N, which means it can comfortably lift a 5.1 kg part vertically with a 2:1 safety margin. The U back cover provides a 90-degree port orientation, while the 1/8" port and M6x1.0 male rod thread match the standard Ø16 architecture.
Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60U Technical Specifications
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60U |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60U
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60U Is Used
Package Diverter Gate
Pushes lightweight cardboard cartons on a packaging line using its 100.5 N thrust, while the stainless build withstands humid packing rooms.
Textile Loom Tensioner
Cycles rapidly at 60 mm to maintain fabric tension, relying on the 90-degree U cover for tight lateral mounting in cramped loom frames.
Lab Sample Ejector
Ejects 5 kg test tube racks from a testing station, utilising the ISO 6432 dimensions for straightforward bracket integration on the bench.
Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60U the Right Cylinder?
When sizing this actuator, the Ø12 bore below offers 56.5 N of push at 0.5 MPa, whereas stepping up to the Ø20 bore yields 157.0 N, making this 100.5 N unit the ideal middle ground for moderate pushing tasks. The 60 mm stroke is well within the 500 mm maximum standard limit, avoiding any made-to-order delays. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches; you must select an -S variant if your control system requires sensing. Mounting options include LB foot, FA flange, SDB pivot and TC trunnion styles.
Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve is centred, as the TPU pads only soften end-of-stroke impacts rather than locking the rod. To suspend a load safely during an outage, fit an external rod lock or a pilot-operated check valve. For high-speed cycles that need precise end-deceleration, consider the MIC variable air cushion variant instead of this fixed bumper model.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60U FAQ
At 0.5 MPa it provides 100.5 N push and 86.4 N pull. At 0.7 MPa it provides 140.7 N push and 120.9 N pull. The theoretical maximum force is 20.5 kgf at 1.0 MPa. The air port size is 1/8".
No, this specific SKU does not include a magnet, so CMSG, DMSG or EMSG switches cannot be used. You would need the -S variant for position sensing. It uses fixed TPU bumper pads rather than an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI16X60U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.