Airtac MI16-20 Stainless Steel Mini Cylinder MI16X65CA
The AirTAC Airtac MI16-20 Stainless Steel Mini Cylinder MI16X65CA is a genuine double acting round-body mini air cylinder with a Ø16mm bore and 65mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke65 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
About the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X65CA
Delivering 100.5 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles compact automation with ease. The Ø16 mm bore uses a 1/8" port and an M6×1.0 male rod thread. Its riveted stainless barrel and rod resist mild corrosion, making it superior to painted alternatives in damp environments. The CA rear pivot cover provides a clevis mount for angular movement.
Because the theoretical rating differs from actual usable work, plan for roughly 60 N of real load at 0.5 MPa. This equates to lifting about 5.1 kg vertically with a 2:1 safety margin. Fixed TPU bumper pads absorb stroke-end impact, and the body conforms to ISO 6432 mounting dimensions for easy bracket integration. As this SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches.
Airtac MI16-20 Stainless Steel Mini Cylinder MI16X65CA Technical Specifications
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI16X65CA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI16X65CA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 16 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X65CA Is Used
Textile Loom Tensioning
Uses the CA pivot bracket to maintain consistent fabric tension, applying up to 60 N of safe working force while resisting humid textile mill environments.
Package Deflector Gate
Pushes light cardboard cartons on a sorting line where the 5.1 kg vertical lift capacity easily handles flap actuation and routing duties.
Lab Sample Ejection
Ejects processed vials from a testing carousel, relying on the stainless steel construction to withstand chemical washdowns without corroding.
Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X65CA the Right Cylinder?
When sizing this 16 mm bore, stepping down to the Ø12 model drops the 0.5 MPa push force to 56.5 N, while stepping up to the Ø20 bore increases it to 157.0 N. The 65 mm stroke is well within the 500 mm maximum, keeping rod bending stress low. The CA clevis back cover suits pivoting loads, but remember that venting the air supply causes the piston to drift; these bumpers only decelerate the end of stroke and do not function as a lock. Use a pilot-operated check valve to hold a suspended load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI16-20 Stainless Steel Mini Cylinder MI16X65CA FAQ
This double-acting cylinder has a 1/8" port and generates 100.5 N push / 86.4 N pull at 0.5 MPa, and 140.7 N push / 120.9 N pull at 0.7 MPa. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so CMSG, DMSG or EMSG switches cannot be used. You would need the -S variant for sensing. It uses fixed TPU bumper pads rather than an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI16X65CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.