Airtac MI16-20 Stainless Steel Mini Cylinder MI16X75CM
The AirTAC Airtac MI16-20 Stainless Steel Mini Cylinder MI16X75CM is a genuine double acting round-body mini air cylinder with a Ø16mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
About the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X75CM
Delivering 100.5 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles compact automation with ease. The riveted construction pairs a corrosion-resistant barrel and rod to survive damp environments better than painted alternatives. Its 1/8" port feeds the 6 mm piston rod, while the CM round end cover streamlines the rear profile for tight spaces.
Because it conforms to ISO 6432 mounting dimensions, the body drops directly into standard mini-cylinder brackets and clevises. Fixed TPU bumper pads absorb stroke-end impact without offering adjustable cushioning. Plan for roughly 60 N of actual work at 0.5 MPa, which translates to lifting about 5.1 kg vertically with a 2:1 safety margin.
Airtac MI16-20 Stainless Steel Mini Cylinder MI16X75CM Technical Specifications
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI16X75CM |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI16X75CM
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X75CM Is Used
Textile Loom Guide
Shifts a yarn guide carriage through its 75 mm cycle, where the stainless rod shrugs off humid textile mill conditions.
Bottle Divert Arm
Pushes light PET bottles sideways on a packaging line using a safe 60 N working load without denting the containers.
Small Part Ejector
Kicks stamped plastic parts out of a mould cavity, relying on fixed TPU bumpers to quiet the repeated end-of-stroke impact.
Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X75CM the Right Cylinder?
When sizing this 16 mm bore, compare it against the smaller Ø12 (56.5 N push) for lighter tasks and the larger Ø20 (157.0 N push) if you need more muscle. The 75 mm stroke is well within the 500 mm maximum, keeping rod bending stress low. Without an -S suffix, this SKU lacks a magnet and cannot host CMSG, DMSG or EMSG sensors.
The CM round end cover dictates a specific rear mounting orientation, so verify your bracket geometry. Remember that a standard cylinder drifts if air pressure drops or the valve is centred; the bumpers only decelerate the stroke end rather than locking the load. Fit an external rod lock or pilot check valve if you need strict position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI16-20 Stainless Steel Mini Cylinder MI16X75CM FAQ
It generates 100.5 N push and 86.4 N pull at 0.5 MPa, or 140.7 N push and 120.9 N pull at 0.7 MPa. The theoretical maximum force is 20.5 kgf at 1.0 MPa. Air connects via a 1/8" port, and the male rod thread is M6x1.0.
No, this specific SKU lacks the internal magnet required for switches. You must select the -S variant to mount CMSG, DMSG or EMSG sensors for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI16X75CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.