Airtac MI16-20 Stainless Steel Mini Cylinder MI16X80CA
The AirTAC Airtac MI16-20 Stainless Steel Mini Cylinder MI16X80CA is a genuine double acting round-body mini air cylinder with a Ø16mm bore and 80mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
About the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X80CA
Delivering 100.5 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles compact automation with ease. The 16 mm bore pairs a 6 mm piston rod with an M6x1.0 male thread, while the 1/8" port ensures adequate air flow for its 30-800 mm/s speed range. Its riveted stainless construction resists mild corrosion and washdown, offering superior durability in damp environments compared to painted alternatives.
Designed with a CA pivot clevis back cover, the unit swings naturally on articulated joints. It uses the ISO 6432 mini-cylinder mounting interface, dropping directly into standard brackets and clevises for easy design integration. For practical sizing, plan for roughly 60 N of real work at 0.5 MPa, which means it lifts about 5.1 kg vertically with a 2:1 safety margin. Fixed TPU bumper pads absorb the impact at stroke extremes, smoothly decelerating the piston without complex adjustments.
Airtac MI16-20 Stainless Steel Mini Cylinder MI16X80CA Technical Specifications
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI16X80CA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI16X80CA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 16 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X80CA Is Used
Textile Loom Guide
Shifts a yarn guide arm repeatedly using the CA pivot clevis, leveraging the 100.5 N push force to maintain tension on synthetic fibres.
Carton Flap Folder
Swings corrugated box flaps into position prior to taping, where the stainless steel barrel withstands dusty and occasionally humid packing environments.
Sorting Diverter
Pivots a lightweight gate to route small parcels on a conveyor belt, relying on the 80 mm stroke and ISO 6432 bracket dimensions for a compact footprint.
Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X80CA the Right Cylinder?
When sizing this 16 mm bore against its neighbours, step down to the Ø12 bore if your load requires less than 56.5 N push at 0.5 MPa, or step up to the Ø20 bore for heavier rigs demanding 157.0 N. The 80 mm stroke is well within the 500 mm maximum standard limit, keeping the assembly compact. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG sensors; choose an -S variant if you require position feedback. Beyond the standard LB foot, FA flange, SDB pivot block and TC trunnion options, this CA back cover excels at pivot mounting.
Remember that a plain double-acting cylinder drifts when air is removed or the valve is centred, as the TPU bumpers only soften the end-of-stroke impact rather than locking the rod. To suspend a load safely mid-stroke, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit. Additionally, for high-speed cycles where the fixed bumpers are insufficient, consider the MIC variant which features adjustable air cushions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI16-20 Stainless Steel Mini Cylinder MI16X80CA FAQ
This 16 mm bore cylinder features a 1/8" port and generates 100.5 N push / 86.4 N pull at 0.5 MPa, 140.7 N push / 120.9 N pull at 0.7 MPa, with a theoretical maximum of 20.5 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet. You must select an -S variant to mount CMSG, DMSG or EMSG switches for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI16X80CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.