Airtac MI16-20 Stainless Steel Mini Cylinder MI16X80SCA
The AirTAC Airtac MI16-20 Stainless Steel Mini Cylinder MI16X80SCA is a genuine double acting round-body mini air cylinder with a Ø16mm bore and 80mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
About the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X80SCA
Delivering 100.5 N of push force at 0.5 MPa, this double-acting stainless-steel mini cylinder handles compact automation with ease. The 16 mm bore features a 1/8" port and a 6 mm piston rod, while the rolled riveted body shrugs off mild corrosion better than painted alternatives. The integrated -S magnet supports CMSG, DMSG and EMSG sensors for position detection.
Because the 100.5 N rating leaves room for friction, plan for roughly 60 N of actual work. That translates to lifting about 5.1 kg vertically with a safe 2:1 margin. Fixed TPU bumper pads absorb end-of-stroke impact, and the built-in CA rear clevis simplifies pivot mounting.
Airtac MI16-20 Stainless Steel Mini Cylinder MI16X80SCA Technical Specifications
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI16X80SCA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI16X80SCA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 16 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X80SCA Is Used
Package Diverter Arm
Swings a lightweight routing gate on a packaging line, using the CA clevis to pivot smoothly and the 100.5 N thrust to push cartons onto an adjacent belt.
Lab Sample Ejector
Ejects plastic sample trays from a test station, where the stainless barrel resists chemical splashes and the 80 mm stroke provides precise clearance.
Small Part Clamp
Secures plastic housings during a ultrasonic welding process, applying a safe 60 N of holding force without crushing the component.
Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X80SCA the Right Cylinder?
This 16 mm bore sits neatly between the lighter 12 mm option (56.5 N push) and the more powerful 20 mm size (157 N push). The 80 mm stroke is well within the 500 mm maximum, keeping rod bending stress low. To match standard hardware, the body uses the ISO 6432 mounting interface for straightforward bracket selection.
Remember that venting the air supply causes the piston to drift, as the TPU bumpers only decelerate the stroke end rather than locking the rod. Fit an external pilot check valve if you need to freeze a load mid-travel. The CA pivot cover pairs well with SDB or TC mounts, and the -S magnet ensures compatibility with reed and electronic switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI16-20 Stainless Steel Mini Cylinder MI16X80SCA FAQ
At 0.5 MPa it provides 100.5 N push and 86.4 N pull. At 0.7 MPa it provides 140.7 N push and 120.9 N pull. The theoretical maximum force is 20.5 kgf at 1.0 MPa, and the air port is 1/8".
Yes, the -S suffix indicates a built-in piston magnet compatible with CMSG, DMSG and EMSG switches. Additionally, the 16 mm bore adheres to ISO 6432 mounting dimensions, allowing it to drop into standard mini-cylinder brackets and clevises.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI16X80SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.