Airtac MI16-20 Stainless Steel Mini Cylinder MI20X165SCA
The AirTAC Airtac MI16-20 Stainless Steel Mini Cylinder MI20X165SCA is a genuine double acting round-body mini air cylinder with a Ø20mm bore and 165mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke165 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper pads
About the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X165SCA
Delivering 157 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles demanding 20 mm bore tasks. The riveted barrel and rod shrug off mild corrosion, outlasting painted alternatives in damp or washdown settings. A 1/8" port and M8x1.25 male rod thread secure the air and load connections.
Because the -S suffix equips the piston with a magnet, you can mount CMSG, DMSG or EMSG switches for position sensing. Fixed TPU bumper pads absorb stroke-end impact without the tuning an adjustable cushion demands. Plan for roughly 94 N of actual work at 0.5 MPa, which translates to lifting about 8 kg vertically with a 2:1 safety margin.
Airtac MI16-20 Stainless Steel Mini Cylinder MI20X165SCA Technical Specifications
| Model | Airtac MI16-20 Stainless Steel Mini Cylinder MI20X165SCA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI20X165SCA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 20 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X165SCA Is Used
Package Diverter Gate
Pivots a sorting flap on a packaging line using the CA clevis, applying 157 N at 0.5 MPa to push cardboard cartons onto a secondary belt.
Textile Loom Tensioner
Adjusts yarn tension arms in a humid textile facility, relying on the stainless steel rod to resist moisture while cycling through the 165 mm stroke.
Pallet Labelling Arm
Swings a label applicator into position, using the built-in magnet and a DMSG sensor to confirm the 165 mm extension before stamping the pallet side.
Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI20X165SCA the Right Cylinder?
Sizing across the range, the 16 mm bore below offers 100.5 N push at 0.5 MPa, while the 25 mm bore above steps up to 245.3 N. This 20 mm model fits neatly in the middle for medium-duty cycling. The CA back cover provides a rear pivot for clevis mounting, ideal for articulating mechanisms.
Note that a standard cylinder drifts if air pressure drops or the valve centres; the TPU pads only decelerate the end of stroke and will not lock the load. For vertical or suspended loads, install an external rod lock or pilot-operated check valve. At 165 mm, keep the rod guided to prevent side-load bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI16-20 Stainless Steel Mini Cylinder MI20X165SCA FAQ
This 20 mm bore cylinder features a 1/8" port. It generates 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum of 32 kgf at 1.0 MPa.
Yes, it uses the ISO 6432 mounting interface for standard mini-cylinder brackets. The -S magnet allows CMSG, DMSG and EMSG sensors, and the CA back cover adds a pivot clevis mount for angled loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI20X165SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.