Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CATC
The AirTAC Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CATC is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 25mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CATC
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust actuation in tight spaces. The 25 mm bore uses a 1/8" port and an M10x1.25 male rod thread. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted steel in damp or washdown environments. Plan for about 147 N of actual work at 0.5 MPa, which means it lifts roughly 12.5 kg vertically with a 2:1 safety margin.
The Ø25 body conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets and clevises. Fixed TPU bumper pads absorb stroke-end impact to decelerate the piston smoothly. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches.
Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CATC Technical Specifications
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CATC |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CATC
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CATC Is Used
Clamp Actuation
Drives short-stroke clamping arms on machining fixtures, using its 245 N push force to secure aluminium housings during milling.
Diverter Gate
Pivots a sorting flap on a packaging conveyor via the CA clevis, handling the 12.5 kg vertical lift requirement of the gate mechanism.
Carton Stopper
Extends a 25 mm stopper blade on a stainless-steel washdown line, holding corrugated cartons momentarily for labeling.
Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CATC the Right Cylinder?
When sizing this 25 mm bore, stepping down to a 20 mm cylinder drops the 0.5 MPa push force to 157 N, while moving up to a 32 mm bore increases it to 402 N. This model includes a CA rear pivot cover and pairs with a TC trunnion mount, ideal for articulating mechanisms that require angular alignment. The 25 mm stroke keeps the rod short to minimize side-load bending.
Note that a standard double-acting cylinder drifts when air pressure is lost or the valve is centered. The TPU bumpers only soften the end of stroke and do not function as a brake. To suspend a load safely, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CATC FAQ
This 25 mm bore cylinder features a 1/8" port. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum force of 50 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, so it cannot accept CMSG, DMSG or EMSG switches. You would need the -S variant for magnetic sensing. It uses fixed TPU bumper pads for deceleration and features a CA clevis with TC trunnion mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CATC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.