Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CMTC
The AirTAC Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CMTC is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 25mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CMTC
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust actuation in tight spaces. The 25 mm bore uses a 1/8" port and a 10 mm rod, while the riveted stainless barrel shrugs off mild corrosion better than painted alternatives in damp environments. Its 25 mm stroke strikes a balance for compact ejection jobs.
Because the rated output rarely translates perfectly to real-world friction, planning for about 147 N of actual work at 0.5 MPa prevents sizing errors. Vertically, it lifts roughly 12.5 kg with a 2:1 safety margin. Fixed TPU bumper pads absorb the impact at stroke ends, and the CM round end cover pairs with the TC trunnion mount for pivoting frames. Note this SKU lacks a magnet, so it cannot host CMSG or DMSG sensors without switching to an -S variant.
Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CMTC Technical Specifications
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CMTC |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CMTC
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CMTC Is Used
Package Diverter Gate
Swings a lightweight sorting flap on a packaging line using the TC trunnion to pivot smoothly within the 25 mm stroke.
Small Part Ejector
Pushes machined metal components out of a fixture, utilizing the 245.3 N push force to overcome initial friction.
Clamp Actuator
Secures cardboard blanks during a folding process, relying on the stainless steel barrel to withstand dusty, humid plant air.
Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CMTC the Right Cylinder?
When sizing this 25 mm bore, dropping down to a 20 mm cylinder reduces the push force to 157 N at 0.5 MPa, whereas stepping up to a 32 mm bore increases it to 402 N. The TC trunnion mount supplied here suits pivoting loads, but remember a plain cylinder drifts if air pressure drops or the valve centers. The fixed bumpers only decelerate the end of stroke and never act as a lock, so suspend a load safely using an external pilot check valve or rod lock. For high-speed cycling that needs end-of-stroke tuning, consider the MIC variable cushion variant instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CMTC FAQ
This 25 mm bore cylinder features a 1/8" port and generates 245.3 N push / 206.1 N pull at 0.5 MPa, 343.4 N push / 288.5 N pull at 0.7 MPa, and a theoretical maximum of 50 kgf at 1.0 MPa.
No, this specific SKU lacks a piston magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must select an -S magnet variant for position sensing. It uses fixed TPU bumper pads for end-of-stroke deceleration rather than an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CMTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.