Airtac MI25~40 Stainless Steel Mini Cylinder MI25X600R
The AirTAC Airtac MI25~40 Stainless Steel Mini Cylinder MI25X600R is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 600mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke600 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X600R
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles substantial work within a compact footprint. The 600 mm stroke specified here exceeds the 500 mm maximum standard stroke for the Ø25 bore, making this a made-to-order configuration. It features a 1/8" air port, a Ø10 mm piston rod with an M10x1.25 male thread, and an R axial-in rear cover for streamlined plumbing. The stainless barrel and rod resist mild corrosion, offering a real advantage over painted alternatives in damp or washdown settings.
Built to ISO 6432 mounting dimensions, it drops directly into standard mini-cylinder brackets and clevises. Fixed TPU bumper pads absorb stroke-end impact without adding bulk. Because it lacks the -S magnet, this specific SKU cannot host CMSG, DMSG, or EMSG sensors. For practical sizing, plan for roughly 147 N of usable work at 0.5 MPa, which translates to safely lifting about 12.5 kg vertically with a 2:1 margin.
Airtac MI25~40 Stainless Steel Mini Cylinder MI25X600R Technical Specifications
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X600R |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X600R
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X600R Is Used
Packaging Line Diverters
Drives heavy cardboard diverters on high-speed packaging conveyors, utilizing the 245.3 N push force to redirect loaded cartons reliably.
Textile Loom Tensioning
Applies consistent tension on textile manufacturing looms, where the stainless build withstands humid dye-house environments.
Palletising Stop Gates
Acts as a robust stop gate in automated palletising cells, holding back heavy product queues before the pick station.
Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X600R the Right Cylinder?
When sizing this Ø25 bore, compare it against its neighbours: a Ø20 generates 157 N of push at 0.5 MPa, while a larger Ø32 provides 402 N. If your application requires position feedback, you must select the -S magnet variant, as this base model cannot accept a sensor. The 600 mm stroke is non-standard and made-to-order; at this extended length, carefully manage side loads to prevent rod bending and premature seal wear. Furthermore, a plain double-acting cylinder drifts when air is lost or the valve is centred—the TPU bumpers only decelerate the stroke end and do not act as a lock. To suspend a load safely, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI25~40 Stainless Steel Mini Cylinder MI25X600R FAQ
This Ø25 mm bore cylinder uses a 1/8" air port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum force of 50 kgf at 1.0 MPa.
Yes, the Ø25 bore conforms to ISO 6432 mounting dimensions, fitting standard clevises and brackets, and features an R axial-in rear cover. However, because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG sensors; you must specify the -S variant for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X600R
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.