Airtac MI25~40 Stainless Steel Mini Cylinder MI32X10SCMTC
The AirTAC Airtac MI25~40 Stainless Steel Mini Cylinder MI32X10SCMTC is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X10SCMTC
Delivering 402.2 N of push force at 0.5 MPa, this AirTAC MI32X10SCMTC actuator is a double-acting round-body mini cylinder built with a stainless-steel barrel and rod. The riveted construction shrinks the footprint while resisting mild corrosion, making it highly suitable for damp washdown environments. It breathes through a 1/8" port and relies on fixed TPU bumper pads to decelerate the piston at stroke extremes.
Because the 10 mm stroke is so brief, you can plan for roughly 241 N of actual work at 0.5 MPa, which translates to lifting about 20.5 kg vertically with a safe 2:1 margin. The built-in magnet (-S) supports CMSG, DMSG and EMSG switches for position confirmation, while the CM round back cover and TC trunnion mounting equip it for pivoting installations.
Airtac MI25~40 Stainless Steel Mini Cylinder MI32X10SCMTC Technical Specifications
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X10SCMTC |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI32X10SCMTC
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X10SCMTC Is Used
Clamp Actuation
Drives short-stroke clamping jaws on CNC machining fixtures, using its 402.2 N push force to grip aluminium parts securely during milling.
Gate Diverter
Pivots a sorting flap on a packaging conveyor via its TC trunnion mount, rapidly redirecting cartons down a secondary lane.
Press Pin Insertion
Presses dowel pins into sheet metal assemblies, leveraging the 10 mm stroke and 20.5 kg vertical lift capacity for precise, repetitive seating.
Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X10SCMTC the Right Cylinder?
When sizing this 32 mm bore, dropping down to a 25 mm cylinder reduces your 0.5 MPa push force to 245.3 N, whereas stepping up to a 40 mm bore increases it to 628.3 N. This model hits a robust middle ground for compact tasks. Remember that a standard cylinder drifts if air pressure drops or the valve is centred—the bumpers only soften the end of travel, so add an external rod lock or pilot check valve if you need to suspend a load safely. The TC trunnion pairs with the CM rear cover to handle pivoting loads, but keep the rod aligned to avoid side-loading damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI25~40 Stainless Steel Mini Cylinder MI32X10SCMTC FAQ
This 32 mm bore cylinder uses a 1/8" air port. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum force of 82 kgf at 1.0 MPa.
No, this model uses fixed TPU bumper pads to decelerate at the stroke end, not an adjustable air cushion (which requires the MIC variant). As a 32 mm bore, it is a non-ISO-6432 round-body mini cylinder, so you must use standard TC trunnion and CM round end mounts rather than ISO mini brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI32X10SCMTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.