Airtac MI8~12 Stainless Steel Mini Cylinder MI12X45CA
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI12X45CA is a genuine double acting round-body mini air cylinder with a Ø12mm bore and 45mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ12 mm
- Stroke45 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI12X45CA
Generating 56.5 N of push force at 0.5 MPa, this 12 mm bore double-acting actuator handles light-duty positioning with precision. The riveted stainless-steel barrel and rod shrug off mild corrosion, giving it a real edge over painted alternatives in damp production areas. Its compact 45 mm stroke and M5x0.8 port make it highly practical for tight spaces.
Built to ISO 6432 mounting dimensions, the body drops directly into standard mini-cylinder brackets. It uses fixed TPU bumper pads to decelerate the piston at stroke ends rather than adjustable air cushions. For sizing moving masses, plan for roughly 34 N of actual work at 0.5 MPa, which means it can safely lift about 2.9 kg vertically against gravity.
Airtac MI8~12 Stainless Steel Mini Cylinder MI12X45CA Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI12X45CA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø12 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 57 N | 42 N |
| 0.7 MPa | 79 N | 59 N |
| Max (@1.0 MPa) | 12 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI12X45CA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 12 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI12X45CA Is Used
Pick-and-Place Diverter
Uses the 45 mm stroke to push small electronic components onto a test fixture with 56.5 N of force at 0.5 MPa.
Packaging Gate Flap
Actuates a lightweight routing gate on a conveyor, relying on the CA pivot clevis to accommodate the arc of the swing.
Lab Sample Ejector
Ejects vials from a carousel, where the stainless-steel rod provides necessary washdown resistance against mild chemical splashes.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI12X45CA the Right Cylinder?
If your task requires less force, the Ø8 bore provides 25.1 N of push at 0.5 MPa, while stepping up to the Ø16 bore yields 100.5 N for heavier mechanisms. This specific CA back cover features a rear pivot clevis, ideal for angular load alignment, and you can pair it with LB foot or TC trunnion brackets. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches.
Remember that a standard double-acting cylinder drifts if air pressure drops or the valve is centred; the TPU bumpers only soften the end-of-stroke impact and will not lock the load. To suspend a vertical weight safely, install an external pilot check valve or a dedicated rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI12X45CA FAQ
At 0.5 MPa it pushes 56.5 N and pulls 42.4 N; at 0.7 MPa it pushes 79.1 N and pulls 59.4 N. The theoretical maximum force is 11.5 kgf at 1.0 MPa. The air port is M5x0.8 and the male rod thread is M6x1.0.
No, this specific SKU does not have a magnet. You must select the -S variant (MI12X45CA-S) to use CMSG, DMSG or EMSG magnetic switches. The unit features a CA rear pivot clevis and conforms to ISO 6432 mounting dimensions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI12X45CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.