Airtac MI8~12 Stainless Steel Mini Cylinder MI12X45SCA
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI12X45SCA is a genuine double acting round-body mini air cylinder with a Ø12mm bore and 45mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ12 mm
- Stroke45 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI12X45SCA
Delivering 56.5 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles compact actuation with ease. The riveted barrel and rod shrug off mild corrosion, making it far superior to painted alternatives in damp processing areas. Equipped with a built-in piston magnet, it supports CMSG, DMSG and EMSG switches for position sensing.
Because the Ø12 bore uses the ISO 6432 mounting interface, it drops directly into standard mini-cylinder brackets without custom machining. Plan for a safe working load of roughly 34 N, which lets you lift about 2.9 kg vertically against gravity. The M5x0.8 air port keeps the pneumatic footprint small, while fixed TPU bumper pads quietly absorb end-of-stroke impacts.
Airtac MI8~12 Stainless Steel Mini Cylinder MI12X45SCA Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI12X45SCA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø12 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 57 N | 42 N |
| 0.7 MPa | 79 N | 59 N |
| Max (@1.0 MPa) | 12 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI12X45SCA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 12 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI12X45SCA Is Used
Electronic Component Sorting
Pushes small electronic relays down a guided chute using the 56.5 N thrust, relying on the compact 12 mm bore to fit densely packed machinery.
Pouch Sealing Clamp
Holds a lightweight polymer pouch flat during heat sealing, where the stainless body resists occasional washdowns and the CA clevis accommodates jaw articulation.
Lab Sample Diversion
Actuates a small flipper gate to route test tubes, safely lifting components under the 2.9 kg vertical limit while position is confirmed by a DMSG sensor.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI12X45SCA the Right Cylinder?
When sizing this 45 mm stroke unit, compare it against its neighbours: a Ø10 bore provides 39.3 N of push at 0.5 MPa, whereas stepping up to a Ø16 bore yields 100.5 N. If your mechanism requires true position holding on air loss, remember this base MI will drift; you must add an external rod lock or pilot check valve. The CA back cover provides a pivot clevis for angular alignment, which is highly useful for articulating mechanisms.
The included magnet enables solid-state or reed sensing along the body. For applications needing rapid cycling with heavier loads, consider the MIC variant for its variable air cushion, as this model relies solely on fixed TPU pads. Always verify side loading to prevent rod bending on the 6 mm rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI12X45SCA FAQ
At 0.5 MPa it provides 56.5 N push and 42.4 N pull. At 0.7 MPa it provides 79.1 N push and 59.4 N pull. The theoretical maximum force is 11.5 kgf at 1.0 MPa. It uses an M5x0.8 air port.
No, the piston will drift if air is lost or the valve is centred. The fixed TPU bumper pads only decelerate the stroke end and do not act as a brake. For vertical load holding, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI12X45SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.