Airtac MI8~12 Stainless Steel Mini Cylinder MI12X60SUFA
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI12X60SUFA is a genuine double acting round-body mini air cylinder with a Ø12mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ12 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI12X60SUFA
Delivering 56.5 N of push force at 0.5 MPa, this double-acting 12 mm bore mini cylinder features a 60 mm stroke and an integrated piston magnet for position sensing. The stainless-steel rolled barrel and piston rod shrug off mild corrosion, giving it a real edge over painted alternatives in damp production zones. Its compact riveted round body incorporates fixed TPU bumper pads to decelerate the stroke end, while the U rear cover provides a 90-degree port orientation for tight machinery layouts.
For practical sizing, plan for a safe working load of roughly 34 N, which is about 60% of the 0.5 MPa push rating. In a vertical lift scenario, this equates to raising around 2.9 kg safely with a 2:1 margin. The built-in magnet supports CMSG, DMSG and EMSG switches, and the M5x0.8 air port keeps pneumatic plumbing compact.
Airtac MI8~12 Stainless Steel Mini Cylinder MI12X60SUFA Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI12X60SUFA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø12 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 57 N | 42 N |
| 0.7 MPa | 79 N | 59 N |
| Max (@1.0 MPa) | 12 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI12X60SUFA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 12 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI12X60SUFA Is Used
Electronic Component Sorting
Uses the 56.5 N push force and CMSG sensor magnet to push small PCB assemblies into testing trays with repeatable 60 mm strokes.
Small Carton Flap Folding
Ideal for compact packaging lines where the stainless build resists washdown, and the U 90-degree cover fits into tight conveyor frames.
Lab Sample Diverting
Handles delicate routing of test tubes on diagnostic machines, safely moving loads under the 34 N working threshold without harsh impacts.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI12X60SUFA the Right Cylinder?
When sizing this 12 mm bore actuator, compare it against its neighbours: a 10 mm bore yields 39.3 N of push at 0.5 MPa, whereas stepping up to a 16 mm bore provides 100.5 N. This model includes an FA flange for secure front mounting and a U back cover for 90-degree orientation. Because the stroke is 60 mm, keep side-loading minimized to prevent rod bending and premature seal wear.
Remember that a standard double-acting cylinder will drift if air pressure drops or the valve is centered, as the TPU bumpers only soften end-of-stroke impacts without locking the piston. To suspend a load safely during an air loss event, incorporate an external rod lock or a pilot-operated check valve into your circuit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI12X60SUFA FAQ
This 12 mm bore cylinder has an M5x0.8 air port and generates 56.5 N push / 42.4 N pull at 0.5 MPa, and 79.1 N push / 59.4 N pull at 0.7 MPa. The theoretical maximum force is 11.5 kgf at 1.0 MPa.
No, it uses fixed TPU bumper pads to decelerate the stroke end rather than an adjustable air cushion. It conforms to ISO 6432 mounting dimensions for standard brackets, and the -S suffix means it has a built-in magnet for CMSG, DMSG or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI12X60SUFA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.