Airtac MICD Air Cushion Double Rod Mini Cylinder MICD25X75
The AirTAC Airtac MICD Air Cushion Double Rod Mini Cylinder MICD25X75 is a genuine double acting, double rod + cushion round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, double rod + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MICD Air Cushion Double Rod Mini Cylinder MICD25X75
Delivering 206.1 N of equal force in both directions at 0.5 MPa, the AirTAC MICD25X75 is a double-acting, double-rod round-body mini cylinder. A piston rod exits both end covers, ensuring identical thrust and retraction forces while naturally resisting rotation. Adjustable air cushions at both ends soak up high-speed end-of-stroke shock, protecting your payload during rapid 75 mm moves.
Built with a stainless-steel barrel and rod, this riveted construction handles mild corrosion and washdown environments. It uses the ISO 6432 mounting interface for standard mini brackets. This non-magnet SKU cannot host a sensor; adding the -S option enables CMSG, DMSG, or EMSG switches. For sizing, expect a safe working load around 124 N, or a vertical lift of roughly 10.5 kg with a 2:1 margin. The 1/8" port and M10x1.25 male rod thread match the Ø25 bore specification.
Airtac MICD Air Cushion Double Rod Mini Cylinder MICD25X75 Technical Specifications
| Model | Airtac MICD Air Cushion Double Rod Mini Cylinder MICD25X75 |
|---|---|
| Series | MICD ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MICD Air Cushion Double Rod Mini Cylinder MICD25X75
| MICD | ISO 6432 round-body mini cylinder (double-rod, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICD Air Cushion Double Rod Mini Cylinder MICD25X75 Is Used
Gripper Actuation
Drives synchronous grippers with its anti-rotate twin rods, using the adjustable cushions to stop the 206.1 N thrust smoothly without crushing parts.
Diverting Arm
Pushes lightweight cartons at high speed, relying on equal force both ways to retract the arm cleanly while the air cushions prevent end-cap slamming.
Vertical Lift Stop
Raises a 10.5 kg pallet stop reliably, using the double rod to resist side loading and the stainless build to survive humid packing areas.
Is the Airtac MICD Air Cushion Double Rod Mini Cylinder MICD25X75 the Right Cylinder?
When sizing both ways, step down to the MICD20 (131.9 N @0.5 MPa) for lighter duties, or step up to the MICD32 (345.6 N @0.5 MPa) if you need more thrust. Choose this double-rod and adjustable cushion combination when you need guided, anti-rotate motion with shock absorption at high speeds. Mount using LB foot, FA flange, or TC trunnion brackets, plus CA, U, R, or CM back covers—note that the SDB pivot block is not offered on this double-rod variant. Remember that the air cushion only decelerates the piston near stroke end; it does not act as a lock or brake, so add an external rod lock or pilot check valve if you must hold a load on air loss.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICD Air Cushion Double Rod Mini Cylinder MICD25X75 FAQ
It provides equal force both ways: 206.1 N at 0.5 MPa, 288.5 N at 0.7 MPa, and a maximum theoretical output of 42.0 kgf at 1.0 MPa. The air port is 1/8" and the male rod thread is M10x1.25.
This specific SKU lacks a magnet and cannot host CMSG, DMSG, or EMSG sensors; you must select the -S variant for switch readiness. It features a stainless steel round barrel and rod, and uses adjustable air cushions at both ends to absorb shock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICD Cylinders
Request a Quote for Airtac MICD Air Cushion Double Rod Mini Cylinder MICD25X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.