Airtac MICD Air Cushion Double Rod Mini Cylinder MICD25X75S
The AirTAC Airtac MICD Air Cushion Double Rod Mini Cylinder MICD25X75S is a genuine double acting, double rod + cushion round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, double rod + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MICD Air Cushion Double Rod Mini Cylinder MICD25X75S
Twin rods exit both covers of this stainless steel round-body mini cylinder, yielding equal 206.1 N force in both directions while resisting rotation. An adjustable air cushion at each end soaks up high-speed end-of-stroke shock, making the MICD25X75S ideal for fast, guided moves. The -S suffix equips the piston with a magnet for CMSG, DMSG, or EMSG position sensing.
Built to the ISO 6432 mounting interface, this Ø25 bore drops directly into standard mini brackets and clevises. The stainless barrel and rod withstand mild washdown environments. At 0.5 MPa, expect a safe working load around 124 N, or roughly 10.5 kg of vertical lift with a 2:1 margin. The 1/8" port and M10x1.25 male rod thread match standard pneumatic plumbing.
Airtac MICD Air Cushion Double Rod Mini Cylinder MICD25X75S Technical Specifications
| Model | Airtac MICD Air Cushion Double Rod Mini Cylinder MICD25X75S |
|---|---|
| Series | MICD ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MICD Air Cushion Double Rod Mini Cylinder MICD25X75S
| MICD | ISO 6432 round-body mini cylinder (double-rod, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICD Air Cushion Double Rod Mini Cylinder MICD25X75S Is Used
Gripper Actuation
Drives an opposing gripper with 206.1 N of equal force, using the twin rods to maintain jaw alignment during high-speed part transfers.
Divert Stopper
Uses the extended rear rod as a physical stop while the front rod halts items, with air cushions softening the 75 mm stroke impact.
Film Sealing Head
Applies steady pressure for sealing washdown-resistant stainless construction handles packaging environments, while sensors confirm stroke endpoints.
Is the Airtac MICD Air Cushion Double Rod Mini Cylinder MICD25X75S the Right Cylinder?
If you need less push, the smaller Ø20 MICD provides 131.9 N at 0.5 MPa; for heavier loads, step up to the Ø32 bore rated at 345.6 N. Choose this double-rod configuration when you need equal force both ways, anti-rotation stability, or a rear rod to trip a switch. The adjustable needle cushions are critical for speeds up to 800 mm/s, but remember they only decelerate the piston—they do not lock the load on air loss. Use an external rod lock or pilot check valve for holding. Mount via LB foot, FA flange, or TC trunnion (SDB is not offered on double-rods).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICD Air Cushion Double Rod Mini Cylinder MICD25X75S FAQ
Force is equal both ways at 206.1 N at 0.5 MPa and 288.5 N at 0.7 MPa, with a theoretical maximum of 42.0 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa.
No, the piston will drift on air loss. The adjustable air cushions at both ends only decelerate the load near the stroke end; they do not act as a brake. For vertical load holding, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICD Cylinders
Request a Quote for Airtac MICD Air Cushion Double Rod Mini Cylinder MICD25X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.