Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X200
The AirTAC Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X200 is a genuine double acting, double rod + cushion round-body mini air cylinder with a Ø32mm bore and 200mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting, double rod + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X200
Twin rods exit both covers of this stainless round-body mini cylinder, yielding equal force in both directions and built-in resistance to rotation. At 0.5 MPa it provides 345.6 N of thrust, making the safe working load roughly 207 N, or about 17.6 kg of vertical lift with a 2:1 margin. Needle-set air cushions at each end soak up end-of-stroke shock for fast 200 mm moves.
The stainless steel barrel and rod resist mild corrosion and washdown environments. Because this SKU lacks a magnet, it cannot take CMSG, DMSG or EMSG sensors; order the -S variant if you need position sensing. It uses a 1/4 inch port and an M10x1.25 male rod thread.
Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X200 Technical Specifications
| Model | Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X200 |
|---|---|
| Series | MICD mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X200
| MICD | round-body mini cylinder (double-rod, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X200 Is Used
Carton Diverting
Equal force both ways keeps a diverter arm precise on a packaging line, while the cushions absorb the shock of rapid 200 mm strokes.
Guided Clamping
Twin rods resist rotation to clamp parts squarely, and the 345.6 N thrust holds the workpiece securely during machining.
Vertical Lift Stop
Moves about 17.6 kg vertically with a 2:1 safety margin, relying on the double rod to prevent drift and twisting during transfer.
Is the Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X200 the Right Cylinder?
For lighter duty, the MICD25 provides 206.1 N at 0.5 MPa, while the larger MICD40 offers 527.8 N if you need more thrust. This 32 mm bore hits a strong middle ground, and the double-rod plus adjustable cushion combination is ideal for fast, guided, shock-sensitive moves. Remember that the air cushion only decelerates the piston near the stroke end; it is not a lock or brake, so add an external rod lock or pilot check valve if you must hold a load on air loss.
Mounting options include LB foot, FA flange and TC trunnion blocks, but the SDB pivot block is not available on this double-rod variant. Foot, flange and trunnion mounts will fit your frame, and back covers CA, U, R and CM are offered.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X200 FAQ
Because a rod exits both ends, the force is equal both ways. It generates 345.6 N at 0.5 MPa, 483.8 N at 0.7 MPa, and a maximum theoretical 70.5 kgf at 1.0 MPa.
No, this specific SKU does not have a magnet and cannot take CMSG, DMSG or EMSG sensors. You must order the -S variant for sensing. The adjustable air cushions at both ends only decelerate the piston near stroke end and do not act as a brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICD Cylinders
Request a Quote for Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.