Airtac MSK Multi-position Locking Cylinder MSK6X10
The AirTAC Airtac MSK Multi-position Locking Cylinder MSK6X10 is a genuine MK multi-mount cylinder (single acting, push type), 6 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 5.7 N of push force at 0.5 MPa. A bumper cushions the impact. As an MK unit a fixed rod stops the piston rod rotating.
- TypeMulti-mount, single acting, push type
- SeriesMK (no-rotating)
- Bore6 mm
- Push thrust @0.5 MPa5.7 N
- Operating pressure0.2 - 1.0 MPa (28 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWithout magnet
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MSK Multi-position Locking Cylinder MSK6X10
The MSK6X10 is an AirTAC MK-series multi-mount cylinder with a compact square body that fixes from 6 directions - front, back, left, right, top and bottom - and mounts side by side to save space. Magnetic-switch slots surround the body, guide precision is high, and no added lubricant is required. This is a single-acting, push-type cylinder with a 6 mm bore and a 10 mm stroke: air pressure pushes the rod out and the internal bumper handles the return. At 0.5 MPa it delivers about 5.7 N of theoretical push force, suited to light-duty pushing and ejecting of small parts. Operating pressure is 0.2-1.0 MPa (28-145 psi), proof pressure is 1.5 MPa (215 psi), and the working temperature is -20 to 70 C (0 to 150 C only with the optional high-temperature seal material).
This is a genuine AirTAC part. The MK family is the no-rotating variant: a fixed rod, no-rotating plate and brass bushing keep the piston rod from turning, useful where a tiny probe or pin must keep its orientation. This model carries no trailing S, so it is supplied WITHOUT a magnet. Dimensions and detailed sizing for this bore and stroke vary, so confirm them from the datasheet - we can provide it on request.
Airtac MSK Multi-position Locking Cylinder MSK6X10 Technical Specifications
| Model | Airtac MSK Multi-position Locking Cylinder MSK6X10 |
|---|---|
| Type | Multi-mount cylinder, single acting, push type |
| Series | MK (no-rotating) |
| Bore | 6 mm |
| Push thrust @0.5 MPa | 5.7 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | Without magnet |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 1.0 MPa (28 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore sets the force: at 0.5 MPa the 6 mm push-type single-acting MSK gives about 5.7 N of theoretical push, the smallest in the MK range; step up to 10, 16 or 25 mm bore when more force is needed. Choose MK when the rod must not rotate, and MD when rotation is allowed. Acting type is a real choice: MSK (single push, as here), MTK (single pull), MK (double), MKD (double rod) or MKJ (adjustable stroke). Single-acting strokes run up to 20 mm, so this 10 mm stroke fits the table; the short cover favors modest strokes, so avoid requesting an over-long stroke. No S on this SKU means no magnet. Thread is PT by default; G thread is available via the G suffix.
Applications
Tiny-part ejection from fixtures
A 6 mm bore with about 5.7 N of push at 0.5 MPa is suited to nudging small stamped or molded parts out of a nest. The no-rotating rod keeps the push pin oriented, and the 10 mm stroke matches shallow part pockets.
Jig positioning pins
In an inspection or assembly jig, the MSK6X10 extends a locating pin into position and the bumper returns it when air is released. The square body fixes from 6 directions so it fits tight jig plates, and units mount side by side for multi-point location.
Light gate and indexing stops
On small indexing dials or slides, this compact cylinder acts as a low-force stop or detent pin. Mounting several cylinders side by side gives evenly spaced stops without enlarging the machine footprint.
FAQ
How much force does the 6 mm bore MSK6X10 actually produce?
As a single-acting push-type cylinder, it provides about 5.7 N of theoretical push force at 0.5 MPa. That is the validated figure for this bore and acting type; the push side is always higher than the pull side on these cylinders, and single-acting figures should not be mixed with double-acting ones. Operating pressure is 0.2-1.0 MPa (28-145 psi). If you need more force, move up to a larger bore.
Can this cylinder be mounted in any orientation, and is the rod rotation-free?
Yes on both counts. The multi-mount square body fixes from 6 directions - front, back, left, right, top and bottom - and cylinders can be placed side by side to save space. The MK series is the no-rotating variant: a fixed rod and no-rotating plate with a brass bushing prevent the piston rod from turning, which matters for pins and probes that must keep their orientation.