Airtac MTD Multi-position Locking Cylinder MTD10X10
The AirTAC MTD Multi-position Locking Cylinder MTD10X10 is a genuine MD multi-mount cylinder (single acting, pull type), 10 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 9.5 N of pull force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, single acting, pull type
- SeriesMD (standard)
- Bore10 mm
- Pull thrust @0.5 MPa9.5 N
- Operating pressure0.2 - 1.0 MPa (28 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWithout magnet
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MTD Multi-position Locking Cylinder MTD10X10
MTD10X10 is a 10 mm bore, 10 mm stroke single-acting pull type cylinder from AirTAC's MD multi-mount series. The compact square body can be fixed from six directions - front, back, left, right, top and bottom - so units sit side by side to save space, and the slots around the body take magnetic switches. Air works in one stroke only, with a speed range of 50-500 mm/s; the cushion is a bumper, the medium is air filtered to 40 um, proof pressure is 1.5 MPa (215 psi) and operating pressure is 0.2-1.0 MPa (28-145 psi). Confirm the pull-side thrust figure for this bore from the datasheet before sizing.
This is a genuine AirTAC part. In the family, MD is the standard series while MK is the no-rotating version with a fixed rod and plate; MTD marks the single-acting pull type. This SKU is without a magnet, with an M5x0.8 port and PT thread as standard. Typical materials are aluminium alloy body and covers, a stainless or S45C rod and NBR seals - bore-specific details and dimensions come from the datasheet, which we confirm on request.
Airtac MTD Multi-position Locking Cylinder MTD10X10 Technical Specifications
| Model | Airtac MTD Multi-position Locking Cylinder MTD10X10 |
|---|---|
| Type | Multi-mount cylinder, single acting, pull type |
| Series | MD (standard) |
| Bore | 10 mm |
| Pull thrust @0.5 MPa | 9.5 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | Without magnet |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 1.0 MPa (28 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore sets the force available; for this single-acting pull type, take the exact pull-side thrust figure from the datasheet rather than quoting push-side numbers. Choose MD if rod rotation is acceptable and MK if the rod must not turn; MTD is single-acting pull, where air drives one stroke only. Strokes for single-acting cylinders run up to 20 mm, so 10 mm fits the table - keep the stroke short, as the covers suit compact duty. This SKU is without a magnet; add S to the code for magnetic-switch sensing, and pick PT (blank) or G port thread.
Applications
Small-parts stopper
Retracts a stopper pin under air to release a small part at the pick station, then the pin returns when air is vented - the bumper cushions the stop. Six-way fixing lets the unit tuck into the fixture.
Jig locating pin
Pulls the locating pin out of a jig so the workpiece can index to the next station, then re-engages when air is released. Side-by-side mounting keeps pin rows close together.
Conveyor divert gate
Mounts through the conveyor frame in any of six directions and retracts the gate or divert finger under air to release or pass small parts along the line.
FAQ
What does MTD10X10 mean in the AirTAC code?
MTD is the single-acting pull type of the MD multi-mount family: air drives one stroke only and the return stroke is not air-driven. 10 is the bore in mm and 10 is the stroke in mm. No trailing S means this SKU is without a magnet, and a trailing G would switch the port thread from PT to G.
Where can I mount it, and how long can the stroke be?
The square body fixes from six directions - front, back, left, right, top and bottom - so cylinders can be mounted side by side to save space. Single-acting strokes run up to 20 mm, so 10 mm suits the short covers. Overall dimensions and any side-load allowance come from the datasheet - we confirm them on request.