Airtac PB Pen-type Cylinder PB10X15SU
The AirTAC Airtac PB Pen-type Cylinder PB10X15SU is a double-acting pen-size (mini) air cylinder with a Ø10mm bore and 15mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ10 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM8×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB10X15SU
The AirTAC PB10X15SU is a double-acting JIS pen-size mini cylinder engineered for high-frequency small-part motion. It features a 10mm bore and a 15mm stroke, generating 39.3 N of push force at 0.5 MPa. The slim SUS304 stainless steel barrel and piston rod provide excellent durability in damp or mildly corrosive environments, keeping end-of-arm tooling extremely light.
This specific configuration includes a built-in piston magnet for position sensing and a U-type back cover with a 90-degree side air inlet for flat plumbing. Air enters via an M5x0.8 port, and the Ø4 mm rod uses an M8x1.0 rod-end thread. A fixed TPU bumper at each end absorbs impact, operating at speeds from 50-800 mm/s.
Airtac PB Pen-type Cylinder PB10X15SU Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB10X15SU |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39.3 N | 33.0 N |
| 0.7 MPa (max) | 55.0 N | 46.2 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB10X15SU
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB10X15SU Is Used
PCB Pick-and-Place
Drives short 15mm ejector strokes in compact electronics assembly jigs where the 2 kg vertical lift capacity and slim profile fit perfectly between dense component reels.
Blister Pack Sealing
Applies 24 N of controlled clamping pressure on small medical blister packs, utilizing the U-type side inlet to keep pneumatic plumbing flat against the machine frame.
Lab Dispenser Actuation
Moves a precision dosing valve in wet laboratory environments, relying on the SUS304 stainless construction to resist chemical humidity while signaling stroke end via an electronic switch.
Is the Airtac PB Pen-type Cylinder PB10X15SU the Right Cylinder?
When sizing this actuator, consider that the 39.3 N push force at 0.5 MPa yields a safe working load of about 24 N (roughly 60% of theoretical) to account for seal friction. For vertical lifts, plan for a maximum part weight of 2 kg to maintain a sane 2:1 safety margin. If you need less force, the Ø6 bore offers 14.2 N push at 0.5 MPa; stepping up to the Ø12 bore provides 56.5 N.
Because the Ø4 mm rod is designed strictly for coaxial thrust, avoid side loads and add an external linear bearing if guiding off-axis masses. The fixed bumper only decelerates the last few millimeters of travel, so meter-out the exhaust or add an external shock absorber when moving heavy tooling at high speeds. Note that a plain PB cylinder drifts when air is lost or the valve is centered—install an external rod lock if your application requires fail-safe position holding. Confirm your ordering essentials: 10mm bore, 15mm stroke, M5x0.8 port, S magnet, U side inlet, and no mounting bracket.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB10X15SU FAQ
At 0.5 MPa, the push force is 39.3 N and the pull force is 33 N. At the maximum operating pressure of 0.7 MPa, the push force is 55 N and the pull force is 46.2 N. The operating pressure range is 0.15-0.7 MPa, with a proof pressure of 1.2 MPa.
The S-designation magnet is compatible with both AirTAC reed (mechanical) and electronic (solid-state) switches. The U back cover provides a 90-degree perpendicular side air inlet, allowing the M5x0.8 port to face sideways for flat plumbing in tight axial spaces.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB10X15SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.