Airtac PB Pen-type Cylinder PB10X30SCB
The AirTAC Airtac PB Pen-type Cylinder PB10X30SCB is a double-acting pen-size (mini) air cylinder with a Ø10mm bore and 30mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ10 mm
- Stroke30 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM8×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB10X30SCB
The AirTAC PB10X30SCB is a JIS pen-size double-acting single-rod mini cylinder engineered for compact automation. It generates 39.3 N of push force and 33 N of pull force at 0.5 MPa, utilizing a 4 mm piston rod with an M8x1.0 rod-end thread. The slim SUS304 stainless steel barrel and screwed-in covers provide excellent durability in damp or mildly corrosive environments while saving valuable space on light end-of-arm tooling.
This specific configuration includes a built-in piston magnet (S) for position detection using AirTAC reed or electronic switches, and a CB double clevis back cover for pivoting loads. Air enters via an M5x0.8 port, and end-of-stroke deceleration is handled by a fixed TPU bumper at each end. Since the bumper only absorbs impact over the final few millimeters, metering out the exhaust or adding an external shock absorber is recommended when cycling high tooling masses at speed.
Airtac PB Pen-type Cylinder PB10X30SCB Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB10X30SCB |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39.3 N | 33.0 N |
| 0.7 MPa (max) | 55.0 N | 46.2 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB10X30SCB
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB10X30SCB Is Used
PCB Pick-and-Place
Drives a small vacuum nozzle on a pick-and-place head to lift electronic components, utilizing the 2 kg vertical lift capacity and slim profile for tight spacing between neighboring nozzles.
Pouch Flap Folding
Extends a lightweight plastic blade to tuck the top flap of a retail package on a continuous flow wrapper, pivoting smoothly via the CB double clevis to follow the conveyor angle.
Lab Dispenser Actuation
Pushes a micro-pump plunger to meter reagents into diagnostic vials, where the SUS304 stainless barrel resists humidity and the fixed TPU bumper prevents harsh mechanical slamming.
Is the Airtac PB Pen-type Cylinder PB10X30SCB the Right Cylinder?
When sizing this 10 mm bore actuator, consider stepping down to the 6 mm bore if your payload is very light, which provides 14.2 N of push at 0.5 MPa. If your application requires more thrust, stepping up to the 12 mm bore yields 56.5 N of push at 0.5 MPa. For the PB10X30SCB specifically, plan for a safe working load of about 24 N (roughly 60% of the 0.5 MPa theoretical force) to account for seal friction and smooth travel.
Keep in mind that a plain pen-size actuator does not hold its position if air pressure is lost or the valve is centered; the piston will drift, so an external stop or rod lock is required for fail-safe holding. Because the 4 mm rod is designed for coaxial thrust, avoid side loading and add an external linear bearing for off-axis loads. Confirm your ordering essentials: 10 mm bore, 30 mm stroke, M5x0.8 port, S magnet, CB double clevis, and your preferred mounting bracket.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB10X30SCB FAQ
This double-acting cylinder delivers 39.3 N push and 33 N pull at 0.5 MPa, with a maximum push of 55 N and pull of 46.2 N at the 0.7 MPa operating pressure limit. It operates at speeds between 50-800 mm/s, uses an M5x0.8 air port, and has a 4 mm rod with an M8x1.0 rod-end thread.
No, a plain pen-size cylinder will drift if air pressure is lost or the directional valve is centered. The fixed TPU bumper only decelerates the piston near the stroke end and does not act as a locking brake. You must add an external rod lock or mechanical stop to safely hold a suspended load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB10X30SCB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.