Airtac PB Pen-type Cylinder PB10X5SCB
The AirTAC Airtac PB Pen-type Cylinder PB10X5SCB is a double-acting pen-size (mini) air cylinder with a Ø10mm bore and 5mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ10 mm
- Stroke5 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM8×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB10X5SCB
The AirTAC PB10X5SCB is a JIS pen-size double-acting single-rod mini cylinder engineered for short, high-frequency small-part motion. It provides a theoretical push force of 39.3 N and a pull force of 33 N at 0.5 MPa, driven through an M5x0.8 air port. The slim SUS304 stainless round barrel and screwed-in covers keep the assembly extremely light, making it ideal for tight jig spaces and end-of-arm robotic tooling where bulk adds unwanted inertia.
This specific configuration includes a built-in piston magnet (S) for position sensing using AirTAC reed or electronic switches, and a CB double clevis back cover that accommodates pivoting loads. Travel is governed by a fixed TPU bumper at each end rather than an adjustable air cushion. Because the stroke is only 5 mm, the internal bumper handles end-of-stroke energy well, though the thin 4 mm piston rod is designed strictly for coaxial thrust and requires an external guide if subjected to any side load.
Airtac PB Pen-type Cylinder PB10X5SCB Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB10X5SCB |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39.3 N | 33.0 N |
| 0.7 MPa (max) | 55.0 N | 46.2 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB10X5SCB
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB10X5SCB Is Used
Gripper Jaw Actuation
Drives the short 5 mm open-close stroke of small pneumatic grippers handling delicate electronic components on a PCB assembly line.
Sorting Diverter
Pivots via the CB clevis to flick lightweight plastic caps into reject bins on a high-speed bottle manufacturing conveyor.
Micro-Clamp Fixture
Secures small aluminum machined parts in a tight CNC jig, utilizing the slim stainless body to maximize tooling clearance.
Is the Airtac PB Pen-type Cylinder PB10X5SCB the Right Cylinder?
When sizing this actuator, plan for a safe working load of about 24 N, which represents roughly 60% of the 39.3 N theoretical push at 0.5 MPa to account for seal friction and smooth travel. Alternatively, this equates to lifting about 2 kg vertically with a sane 2:1 safety margin. If your application requires slightly less force, the adjacent Ø6 bore offers a 14.2 N push at 0.5 MPa; stepping up to the Ø12 bore yields a 56.5 N push at 0.5 MPa for heavier tooling.
Confirm your ordering essentials to match this exact build: a 10 mm bore, 5 mm stroke, M5x0.8 port, S magnet for switch sensing, and the CB double clevis mount. Note that a plain double-acting cylinder like this does not hold its position if air pressure is lost or the valve is centered—the piston will drift, so an external rod lock or mechanical stop is required for fail-safe load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB10X5SCB FAQ
At 0.5 MPa, the push force is 39.3 N and the pull force is 33 N. At the maximum operating pressure of 0.7 MPa, the push force is 55 N and the pull force is 46.2 N. The operating pressure range is 0.15-0.7 MPa, with a speed of 50-800 mm/s and a proof pressure of 1.2 MPa.
No, the piston will drift if air is lost or the valve is centered. The fixed TPU bumper only decelerates the piston near the stroke end; it does not act as a lock or brake. For vertical load holding, you must add an external rod lock or mechanical stop.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB10X5SCB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.