Airtac PB Pen-type Cylinder PB10X75SU
The AirTAC Airtac PB Pen-type Cylinder PB10X75SU is a double-acting pen-size (mini) air cylinder with a Ø10mm bore and 75mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ10 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM8×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB10X75SU
The AirTAC PB10X75SU is a double-acting JIS pen-size mini cylinder engineered for compact, high-frequency motion. It delivers a theoretical push of 39.3 N and pull of 33 N at 0.5 MPa, driven through an M5x0.8 air port. The slim SUS304 stainless barrel and piston rod provide excellent durability in damp or mildly corrosive environments while keeping mass low for end-of-arm tooling. This specific configuration includes a built-in piston magnet for position sensing and a U-type back cover featuring a 90-degree side air inlet for flat plumbing in tight spaces.
End-of-travel deceleration relies on a fixed TPU bumper at each end, which absorbs impact over the final few millimeters rather than providing an adjustable air cushion. Because the piston rod is a slender 4 mm diameter, it is designed purely for coaxial thrust; over the 75 mm stroke, any off-axis load warrants an external linear bearing to prevent binding. For practical sizing, plan for a safe working load of about 24 N, which accounts for roughly 60 percent of the theoretical 0.5 MPa push force to overcome seal friction and ensure smooth travel.
Airtac PB Pen-type Cylinder PB10X75SU Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB10X75SU |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39.3 N | 33.0 N |
| 0.7 MPa (max) | 55.0 N | 46.2 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB10X75SU
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB10X75SU Is Used
PCB Pick-and-Place
Actuates small vacuum grippers on electronics assembly lines, where the slim 10 mm body fits between dense component reels and the magnet confirms part pickup.
Carton Flap Folding
Extends a lightweight paddle to tuck minor flaps on small pharmaceutical cartons, benefiting from the 90-degree side inlet to keep plumbing flush against the machine frame.
Lab Dispenser Positioning
Moves a micro-valve head over reagent trays in diagnostic equipment, using the SUS304 construction to withstand humid, temperature-controlled chamber environments.
Is the Airtac PB Pen-type Cylinder PB10X75SU the Right Cylinder?
When sizing this 10 mm bore actuator, consider stepping down to the 6 mm bore if your payload is very light, which offers 14.2 N of push at 0.5 MPa. If you need substantially more force, stepping up to the 12 mm bore provides 56.5 N of push at 0.5 MPa. To verify your ordering essentials for this model: confirm the 10 mm bore, 75 mm stroke, M5x0.8 port, the S magnet for reed or electronic switches, and the U-type 90-degree side inlet back cover. Note that a plain PB cylinder does not hold its position if air pressure is lost or the valve is centered; the piston will drift, so applications requiring fail-safe load holding must incorporate an external stop or rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB10X75SU FAQ
This double-acting cylinder generates 39.3 N of push and 33 N of pull at 0.5 MPa. At the maximum operating pressure of 0.7 MPa, it produces 55 N of push and 46.2 N of pull. It operates on filtered air at 0.15-0.7 MPa, supports speeds of 50-800 mm/s, and has a proof pressure of 1.2 MPa.
The S code indicates a built-in piston magnet compatible with AirTAC reed or electronic switches for position detection. Instead of an adjustable air cushion, it uses fixed TPU bumpers at both ends to decelerate the piston over the last few millimeters. If moving heavy tooling at high speed, you should meter-out the exhaust or add an external shock absorber to prevent bottoming out.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB10X75SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.