Airtac PB Pen-type Cylinder PB10X75SULB
The AirTAC Airtac PB Pen-type Cylinder PB10X75SULB is a double-acting pen-size (mini) air cylinder with a Ø10mm bore and 75mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ10 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM8×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB10X75SULB
The AirTAC PB10X75SULB is a JIS pen-size double-acting mini cylinder engineered for compact, high-frequency motion. It supplies 39.3 N of push and 33 N of pull at 0.5 MPa, driven through an M5x0.8 port. The SUS304 stainless barrel and piston rod provide reliable durability in damp or mildly corrosive environments, while the slim round body saves critical space on light end-of-arm tooling.
This configuration includes a built-in piston magnet for position sensing with AirTAC reed or electronic switches. It features a U-type 90-degree side air inlet for flat plumbing routing and an LB mounting bracket for secure body attachment. The 4 mm rod has an M8x1.0 end thread, and end-of-stroke deceleration relies on fixed TPU bumpers at both ends.
Airtac PB Pen-type Cylinder PB10X75SULB Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB10X75SULB |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39.3 N | 33.0 N |
| 0.7 MPa (max) | 55.0 N | 46.2 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB10X75SULB
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB10X75SULB Is Used
PCB Pick-and-Place
Drives small vacuum cups on a pick-and-place head to lift delicate printed circuit boards, utilizing the lightweight pen-size profile to reduce robotic arm inertia.
Blister Pack Sorting
Pushes lightweight pharmaceutical blister packs into secondary cartoning chutes, where the 39.3 N push force at 0.5 MPa easily overcomes minor guide friction.
Lab Dispenser Actuation
Precisely strokes a micro-valve on an automated liquid dispensing station, with the U-type side inlet keeping pneumatic tubing flat against the machine frame.
Is the Airtac PB Pen-type Cylinder PB10X75SULB the Right Cylinder?
When sizing this 10 mm bore actuator, consider stepping down to the 6 mm version if your payload is light, which provides 14.2 N of push at 0.5 MPa. If your jig requires more thrust, stepping up to the 12 mm bore yields 56.5 N at the same pressure. For this 75 mm stroke, plan for a safe working load of roughly 24 N—about 60 percent of the theoretical 0.5 MPa force—to account for seal friction and smooth travel. This equates to lifting about 2 kg vertically with a sane 2:1 margin.
Keep in mind the thin 4 mm rod is designed strictly for coaxial thrust; over this 75 mm extension, any off-axis load warrants an external linear bearing to prevent binding. Note that a standard PB body does not hold its position if air pressure drops or the valve is centered—the piston will drift, and the fixed bumper only decelerates near the stroke end. For fail-safe holding, an external rod lock is required. Confirm your ordering essentials: 10 mm bore, 75 mm stroke, M5x0.8 port, S magnet, U inlet, and LB mount.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB10X75SULB FAQ
At 0.5 MPa, the push force is 39.3 N and the pull force is 33 N. At the maximum operating pressure of 0.7 MPa, the push is 55 N and the pull is 46.2 N. The operating pressure range is 0.15-0.7 MPa, with a speed range of 50-800 mm/s.
It uses fixed TPU bumpers at both ends to decelerate the piston over the last few millimeters; these are not adjustable, so high-speed cycles with heavy tooling may require metering the exhaust or adding an external shock absorber. The built-in S magnet allows position detection using either AirTAC reed or electronic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB10X75SULB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.