Airtac PB Pen-type Cylinder PB12X30SR
The AirTAC Airtac PB Pen-type Cylinder PB12X30SR is a double-acting pen-size (mini) air cylinder with a Ø12mm bore and 30mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ12 mm
- Stroke30 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM10×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB12X30SR
The AirTAC PB12X30SR is a double-acting JIS pen-size mini cylinder engineered for compact, high-frequency motion. It features a 12mm bore and a 30mm stroke, generating 56.5 N of push force and 46.7 N of pull force at 0.5 MPa. The slim SUS304 stainless steel barrel and piston rod provide corrosion resistance for damp production areas while saving valuable space on tight jigs. An integrated R axial inlet keeps plumbing perfectly in-line.
Equipped with a built-in piston magnet (S code), this unit supports AirTAC reed or electronic switches for precise position detection. It uses an M5x0.8 air port and a fixed TPU bumper at each end to absorb impact. Because the bumper only decelerates the final few millimeters, adding an external shock absorber is recommended when moving heavy tooling at high speeds.
Airtac PB Pen-type Cylinder PB12X30SR Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB12X30SR |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø12 mm |
| Rod diameter | Ø5 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 56.5 N | 46.7 N |
| 0.7 MPa (max) | 79.1 N | 65.4 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB12X30SR
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 12 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB12X30SR Is Used
Carton Flap Folding
Actuates a lightweight folding arm on a packaging line, where the compact stainless body resists humidity and the S magnet confirms flap closure position.
Lab Sample Diverting
Pushes test vials into a sorting chute in analytical equipment, benefiting from the fast 50-800 mm/s cycle speed and in-line R port plumbing.
Is the Airtac PB Pen-type Cylinder PB12X30SR the Right Cylinder?
When sizing this actuator, stepping down to the Ø10 bore yields 39.3 N push at 0.5 MPa, while stepping up to the Ø16 bore provides 100.5 N. The Ø5 mm piston rod is designed strictly for coaxial thrust; if your application involves off-axis loads, incorporate an external linear bearing to prevent binding.
To confirm your ordering essentials: specify the 12mm bore, 30mm stroke, M5x0.8 port, S magnet, and R axial inlet. Note that a standard PB body does not hold its position if air pressure drops or the valve is centered—the piston will drift. If your process requires fail-safe load holding, you must integrate an external rod lock or mechanical stop.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB12X30SR FAQ
At 0.5 MPa, the push force is 56.5 N and the pull force is 46.7 N. At the maximum operating pressure of 0.7 MPa, the push force is 79.1 N and the pull force is 65.4 N. The operating pressure range is 0.15-0.7 MPa, with a speed of 50-800 mm/s.
No, a plain PB-type cylinder does not hold its load on air loss or when the valve is centered; the piston will drift. The fixed TPU bumper only decelerates the piston near stroke end and does not act as a brake. An external rod lock or mechanical stop is required for fail-safe holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB12X30SR
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.