Airtac PB Pen-type Cylinder PB12X30U
The AirTAC Airtac PB Pen-type Cylinder PB12X30U is a double-acting pen-size (mini) air cylinder with a Ø12mm bore and 30mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ12 mm
- Stroke30 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM10×1.0
- CushionElastic bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PB Pen-type Cylinder PB12X30U
The AirTAC PB12X30U is a double-acting JIS pen-size mini cylinder engineered for compact, high-frequency small-part motion. It provides a theoretical push of 56.5 N and a pull of 46.7 N at 0.5 MPa. The slim SUS304 stainless barrel and piston rod resist damp or mildly corrosive environments, making it highly durable for wet production lines.
This variant features a U-type back cover with a 90-degree side air inlet for flat plumbing, alongside an M5x0.8 port and an M10x1.0 rod-end thread. It relies on a fixed TPU bumper at each end to decelerate the stroke. Because the rod is a slender Ø5 mm, you should maintain coaxial thrust and avoid side loading to prevent guide wear.
Airtac PB Pen-type Cylinder PB12X30U Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB12X30U |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø12 mm |
| Rod diameter | Ø5 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 56.5 N | 46.7 N |
| 0.7 MPa (max) | 79.1 N | 65.4 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB12X30U
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 12 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB12X30U Is Used
Carton Flap Folder
Tucks small corrugated box flaps on a packaging line, utilizing the 90-degree U side inlet to keep pneumatic plumbing flat against the machine frame.
Lab Sample Ejector
Pushes prepared vials out of a testing carousel in analytical instruments, benefiting from the SUS304 stainless build to withstand humid laboratory conditions.
Is the Airtac PB Pen-type Cylinder PB12X30U the Right Cylinder?
When sizing this actuator, stepping down to the Ø10 bore yields 39.3 N of push at 0.5 MPa, while stepping up to the Ø16 bore provides 100.5 N, letting you tune the force to your exact jig requirements.
Confirm your ordering essentials: 12 mm bore, 30 mm stroke, M5x0.8 porting, no sensor magnet, and the U-type 90-degree side inlet. Note that a plain body like this does not hold its position if air pressure drops or the valve is centered—the piston will drift, so an external rod lock is required for fail-safe holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB12X30U FAQ
At 0.5 MPa, the push force is 56.5 N and the pull force is 46.7 N. At the maximum operating pressure of 0.7 MPa, the push is 79.1 N and the pull is 65.4 N. The operating pressure range is 0.15-0.7 MPa, with a speed of 50-800 mm/s.
It uses a fixed TPU bumper at each end that decelerates the piston over the last few millimeters; it is not adjustable, so meter out the exhaust or add an external shock absorber for heavy high-speed tooling. Additionally, it does not hold its load on air loss or valve centering, so an external stop is needed for fail-safe positioning.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB12X30U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.