Airtac PB Pen-type Cylinder PB16X140SU
The AirTAC Airtac PB Pen-type Cylinder PB16X140SU is a double-acting pen-size (mini) air cylinder with a Ø16mm bore and 140mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ16 mm
- Stroke140 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM10×1.0
- CushionElastic bumper (both ends)
About the Airtac PB Pen-type Cylinder PB16X140SU
The AirTAC PB16X140SU is a double-acting JIS pen-size mini cylinder engineered for compact, high-frequency small-part motion. It features a slim SUS304 stainless steel round barrel and piston rod, offering excellent durability in damp or mildly corrosive environments without adding bulk to your end-of-arm tooling. Delivering 100.5 N of push force at 0.5 MPa, it provides robust actuation for light machinery.
This 16mm bore unit uses an M5x0.8 air port and includes a U-type back cover for a 90-degree side inlet, keeping your plumbing flat against the machine frame. The integrated piston magnet supports AirTAC reed or electronic switches for position sensing. Operating at speeds up to 800 mm/s, it relies on a fixed TPU bumper at each end to decelerate the stroke.
Airtac PB Pen-type Cylinder PB16X140SU Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB16X140SU |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø16 mm |
| Rod diameter | Ø5 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 100.5 N | 90.7 N |
| 0.7 MPa (max) | 140.7 N | 126.9 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB16X140SU
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB16X140SU Is Used
PCB Depaneling Router
Pushes a light carrier plate against a fixed fence on an electronics assembly line, utilizing the 90-degree side inlet to keep pneumatic hoses flush within a crowded electronics manufacturing cell.
Blister Pack Flap Tucking
Extends to fold cardboard flaps on pharmaceutical packaging equipment, where the fixed TPU bumper absorbs the end-of-stroke impact during continuous high-speed cycling.
Sorting Diverter Arm
Actuates a small lightweight deflector gate to route small plastic parts on a conveyor, relying on the built-in magnet to trigger an electronic switch for position confirmation.
Is the Airtac PB Pen-type Cylinder PB16X140SU the Right Cylinder?
When sizing this actuator, stepping down to a 12mm bore yields 56.5 N push at 0.5 MPa, while stepping up is not available as 16mm is the largest in this family. For the PB16X140SU, plan for a safe working load of about 60 N (roughly 60% of the 0.5 MPa theoretical force) to account for seal friction and smooth travel. Vertically, this translates to lifting about 5.1 kg with a sane 2:1 safety margin. Remember that a plain cylinder drifts when air is lost or the valve is centered; an external rod lock is required for fail-safe holding. Confirm your ordering essentials: 16mm bore, 140mm stroke, M5x0.8 port, S magnet, U side inlet, and no mounting bracket.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB16X140SU FAQ
This double-acting 16mm bore cylinder delivers a push force of 100.5 N and a pull force of 90.7 N at 0.5 MPa. At the maximum operating pressure of 0.7 MPa, the push force is 140.7 N and the pull force is 126.9 N. It operates between 0.15-0.7 MPa at speeds of 50-800 mm/s.
No, a standard pen-size cylinder will drift if air is lost or the valve is centered. The fixed TPU bumper only decelerates the piston near the stroke end; it does not act as a brake. For vertical loads requiring fail-safe holding, you must add an external stop or rod lock. Additionally, the thin 5mm rod is designed for coaxial thrust, so use an external guide for off-axis loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB16X140SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.