Airtac PB Pen-type Cylinder PB16X60SUFA
The AirTAC Airtac PB Pen-type Cylinder PB16X60SUFA is a double-acting pen-size (mini) air cylinder with a Ø16mm bore and 60mm stroke. Its slim round barrel and back cover are stainless steel, the M5×0.8 ports keep plumbing compact, and the fast, low-friction piston suits high-cycle small-part handling.
- BoreØ16 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM10×1.0
- CushionElastic bumper (both ends)
About the Airtac PB Pen-type Cylinder PB16X60SUFA
The AirTAC PB16X60SUFA is a double-acting JIS pen-size mini cylinder engineered for compact, high-frequency small-part motion. It features a slim SUS304 stainless steel round barrel and piston rod, offering excellent durability in damp or mildly corrosive environments while keeping end-of-arm tooling lightweight. At 0.5 MPa, it generates 100.5 N of push force and 90.7 N of pull force.
This 16 mm bore model integrates a built-in piston magnet (-S) for position sensing using AirTAC reed or electronic switches. It uses an M5x0.8 port and includes a U-style 90-degree side air inlet for flat plumbing alongside an FA mounting bracket. The fixed TPU bumper at each end decelerates the stroke, but for heavier masses, metering out the exhaust is advised.
Airtac PB Pen-type Cylinder PB16X60SUFA Technical Specifications
| Model | Airtac PB Pen-type Cylinder PB16X60SUFA |
|---|---|
| Series | PB JIS pen-size mini cylinder |
| Bore size | Ø16 mm |
| Rod diameter | Ø5 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC PB pen-size datasheet. Piston rod and barrel are stainless steel. Confirm bore, stroke and back-cover option against the product label before installation.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 100.5 N | 90.7 N |
| 0.7 MPa (max) | 140.7 N | 126.9 N |
Values are taken from the AirTAC PB thrust table. Because pull acts on the rod-side annular area, pull force is always lower than push. Actual usable force is reduced by friction — size with a margin.
Model Code: Airtac PB Pen-type Cylinder PB16X60SUFA
| PB | JIS pen-size double-acting mini-cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| CB / U / R | Back cover: CB double clevis, U 90° side inlet, R axial inlet (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PSB (single-acting push), PTB (single-acting pull), PBD (double rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PB Pen-type Cylinder PB16X60SUFA Is Used
PCB Depaneling Router
Drives a lightweight cutting head on an electronic assembly line, utilizing the slim stainless body to fit within tight machine guarding while delivering steady 100.5 N thrust.
Carton Flap Folder
Tucks small cardboard flaps on a packaging conveyor using the FA bracket for secure mounting and the U side inlet to keep pneumatic tubing flush against the machine frame.
Lab Sample Dispenser
Actuates a small pipetting head in a wet laboratory environment, where the SUS304 rod resists mild chemical corrosion and the magnetic switch tracks fluid dispensing cycles.
Is the Airtac PB Pen-type Cylinder PB16X60SUFA the Right Cylinder?
When sizing this actuator, the 12 mm bore variant provides a lighter 56.5 N push at 0.5 MPa, while no larger standard bore exists in this pen-size family, making the 16 mm the top force option at 100.5 N. A practical safe working load is roughly 60 N (about 60% of the 0.5 MPa theoretical force) to account for seal friction and smooth travel. For vertical lifts, plan to hoist about 5.1 kg to maintain a sane 2:1 safety margin.
Because a plain PB-type cylinder does not hold its position if air pressure drops or the valve is centered, you must add an external stop or rod lock for fail-safe load holding. The thin Ø5 mm piston rod is designed strictly for coaxial thrust; over the 60 mm stroke, avoid side loading and add a linear bearing if the tooling is off-axis. Confirm your ordering essentials: 16 mm bore, 60 mm stroke, M5x0.8 port, S magnet, U side inlet, and FA mount.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Slim pen body vs. a standard round cylinder
- ✓ Back cover: CB / U / R inlet direction
- ✓ Magnet (S) for sensors?
- ✓ Mounting: LB / FA / CJ or front thread
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
- check Installation by qualified personnel per AirTAC docs.
Airtac PB Pen-type Cylinder PB16X60SUFA FAQ
This 16 mm bore double-acting cylinder delivers 100.5 N push and 90.7 N pull at 0.5 MPa, with a maximum push of 140.7 N and pull of 126.9 N at 0.7 MPa. It operates at 0.15-0.7 MPa, runs at speeds of 50-800 mm/s, and uses an M5x0.8 port with an M10x1.0 rod-end thread.
It relies on a fixed TPU bumper at each end to decelerate the piston over the last few millimeters, which is not field-adjustable; for high-speed or heavy tooling, add an external shock absorber. The built-in magnet (-S) allows you to track position with AirTAC reed or electronic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PB Pen-Size Cylinders
Request a Quote for Airtac PB Pen-type Cylinder PB16X60SUFA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.