Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X150-30
The AirTAC Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X150-30 is a double-acting pen-size mini cylinder with a rear adjuster screw that shortens the retract end of the stroke. On a Ø10mm bore it gives a nominal 150mm stroke with a 30mm fine-adjustable window — settable from 120 to 150mm, so you set the end position without changing hardware.
- BoreØ10 mm
- Nominal stroke150 mm
- Adjust window30 mm
- Effective range120–150 mm
- Port sizeM5×0.8
- Acting typeDouble acting
About the Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X150-30
The AirTAC PBJ10X150-30 is a double-acting, single-rod pen-size mini cylinder featuring a 30mm adjustable window. A rear M4x0.7 adjuster screw shortens the retract end, providing an effective stroke range of 120 to 150mm. Output force remains identical to a standard PB cylinder, yielding 39.3N push and 33N pull at 0.5MPa. The Ø4mm piston rod and barrel are SUS304 stainless, fitted with a fixed TPU bumper at each end.
This 150mm stroke is a non-standard, made-to-order length for the 10mm bore, exceeding the 100mm standard maximum. The extend end is fixed, so only the back position is tunable. Re-tighten the lock nut after setting to prevent vibration drift. The slim body uses an M5x0.8 port and an M8x1.0 rod-end thread.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X150-30 Technical Specifications
| Model | Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X150-30 |
|---|---|
| Series | PBJ JIS pen-size adjustable-stroke cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Nominal stroke | 150 mm |
| Adjustable window | 30 mm (120–150 mm) |
| Adjuster thread | M4×0.7 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 100 mm |
The adjuster shortens only the retract end; the extend end is fixed. Force is unchanged from the standard PB double-acting cylinder. Confirm the set position against the product label before installation.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39.3 N | 33.0 N |
| 0.7 MPa (max) | 55.0 N | 46.2 N |
Adjusting the stroke does not change output force — these are the same values as the standard PB double-acting cylinder of the same bore. Size with a friction margin.
Model Code: Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X150-30
| PBJ | JIS pen-size adjustable-stroke mini-cylinder series. |
|---|---|
| 10 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -30 | Adjustable-stroke window in mm (10/20/30/40/50/75/100). |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (fixed stroke), PBD (double rod), PBR (front-mount).
Where the Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X150-30 Is Used
Variable-Depth Insertion
Dial in precise insertion depths on trial stops without swapping cylinders, using the rear screw to shorten the retract stroke for delicate pressing tasks.
Changeover Fixtures
Adapt lightweight jig positions rapidly during product changeovers by tuning the 120-150mm effective range directly on the machine.
End-of-Arm Tooling
Fit slim pneumatic actuation into tight robotic grippers, leveraging the pen-size body for compact part ejection and positioning.
Is the Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X150-30 the Right Cylinder?
For sizing, plan for a safe working load of about 24N, which is roughly 60% of the 39.3N push force at 0.5MPa, accounting for seal friction. Alternatively, expect to lift about 2kg vertically using a sane 2:1 margin. If you need less force, the smaller bore is unavailable in this series, but if you require more, a 12mm bore provides 56.5N push at 0.5MPa.
Because the Ø4mm rod is slender over a 150mm stroke, add an external guide or linear bearing for any off-axis loads. The fixed TPU bumper only decelerates the last few millimeters, so meter-out the exhaust or add an external shock absorber when cycling at mid-speed with real tooling mass. Confirm your ordering essentials: bore, stroke, window, magnet (none specified here), and mount.
Quick checklist
- ✓ Need to fine-tune the end position on site
- ✓ Retract end sits within 120–150 mm
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Access to the rear adjuster screw
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Set the adjuster, then re-lock the check nut.
- check The adjuster shortens the retract end only.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X150-30 FAQ
The effective stroke range is 120-150mm. The double-acting force equals a standard PB cylinder of the same bore: 39.3N push and 33N pull at 0.5MPa, or 55N push and 46.2N pull at the 0.7MPa maximum.
The rear M4x0.7 screw shortens the retract end only, leaving the extend end fixed. You must re-tighten the lock nut after setting your position to prevent vibration drift.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBJ Pen-Size Cylinders
Request a Quote for Airtac PBJ Adjustable Pen-Type Cylinder PBJ10X150-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.