Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X95-10S
The AirTAC Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X95-10S is a double-acting, double-rod pen-size mini cylinder whose rear rod carries a stroke adjuster. On a Ø16mm bore it gives a nominal 95mm stroke with a 10mm fine-adjustable window — settable from 85 to 95mm, so you set the end position without changing hardware.
- BoreØ16 mm
- Nominal stroke95 mm
- Adjust window10 mm
- Effective range85–95 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X95-10S
The AirTAC PBJ16X95-10S is a double-acting, double-rod pen-size mini cylinder featuring a 10mm adjustable stroke window. A rear adjuster screw shortens the retract end, providing an effective stroke range of 85-95mm. The extend end remains fixed. The bore is 16mm, the port is M5x0.8, and the rod-end thread is M10x1.0.
The integrated piston magnet (-S) works with AirTAC reed or electronic switches. A fixed TPU bumper decelerates travel at both ends. The Ø5mm rod handles coaxial thrust; use an external guide for off-axis loads over this 95mm stroke.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X95-10S Technical Specifications
| Model | Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X95-10S |
|---|---|
| Series | PBJ JIS pen-size adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Rod diameter | Ø5 mm |
| Nominal stroke | 95 mm |
| Adjustable window | 10 mm (85–95 mm) |
| Adjuster thread | M5×0.8 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
PBJ is a double-rod cylinder: the rear rod carries the stroke adjuster, which sets the stroke end within the adjustable window. Confirm the set position against the product label before installation.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 90.7 N | 90.7 N |
| 0.7 MPa (max) | 126.9 N | 126.9 N |
The rear rod passes through the rear cover, so both piston faces lose rod area: push is shown at the annular-area value (conservative), lower than a single-rod PB push of the same bore. Size with a friction margin.
Model Code: Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X95-10S
| PBJ | JIS pen-size adjustable-stroke mini-cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×95 | Nominal stroke length in mm. |
| -10 | Adjustable-stroke window in mm (10/20/30/40/50/75/100). |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (fixed stroke), PBD (double rod), PBR (front-mount).
Where the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X95-10S Is Used
Changeover Fixtures
Dial in the exact retract stop distance on the fly when switching between product variants on a single fixture base.
Trial Stops
Fine-tune the 85-95mm back position during prototype testing to find the optimal engagement depth without machining new parts.
Is the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X95-10S the Right Cylinder?
Remember that only the retract position is field-adjustable; the extend end is fixed. After setting your 85-95mm range, re-tighten the lock nut on the M5x0.8 adjuster screw to prevent vibration drift. Confirm your ordering essentials: bore, stroke, window, S magnet, and mounting.
Quick checklist
- ✓ Need to fine-tune the end position on site
- ✓ Retract end sits within 85–95 mm
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Access to the rear adjuster screw
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Set the adjuster, then re-lock the check nut.
- check Double rod: the rear rod carries the stroke adjuster.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X95-10S FAQ
The effective stroke range is 85-95mm, adjusted via a 10mm rear window.
A rear screw shortens the retract end while the extend end stays fixed; always re-tighten the lock nut after setting to prevent vibration drift. A plain cylinder does not hold position on air loss, as the piston drifts and the fixed TPU bumper only decelerates near stroke end. Use an external rod lock for fail-safe holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBJ Pen-Size Cylinders
Request a Quote for Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X95-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.