Airtac PSB Single Acting Compact Cylinder PSB12X30R
The AirTAC Airtac PSB Single Acting Compact Cylinder PSB12X30R is a single acting, push type (spring return) pen-size mini cylinder with a Ø12mm bore and 30mm stroke. A single air port drives the push stroke; the built-in return spring resets the rod when air is released, so only one solenoid line is needed.
- BoreØ12 mm
- Stroke30 mm
- Port sizeM5×0.8
- Acting typePush, single acting
- Rod threadM10×1.0
- ReturnSpring
About the Airtac PSB Single Acting Compact Cylinder PSB12X30R
The AirTAC PSB12X30R is a JIS pen-size single-acting push cylinder that extends via one M5x0.8 air port and retracts via an internal spring. It supplies 42.9 N of net push at 0.5 MPa, climbing to 65.5 N at the 0.7 MPa maximum. The built-in return spring ensures the rod fails safe to home upon air loss.
This slim SUS304 stainless body features an R axial inlet for in-line plumbing and a fixed TPU bumper to soften end-of-stroke impacts. Because the spring consumes energy, a 0.2 MPa minimum pressure is required before motion begins. Plan for a safe working load of roughly 26 N to account for seal friction and smooth travel.
Airtac PSB Single Acting Compact Cylinder PSB12X30R Technical Specifications
| Model | Airtac PSB Single Acting Compact Cylinder PSB12X30R |
|---|---|
| Series | PSB JIS pen-size mini cylinder |
| Bore size | Ø12 mm |
| Rod diameter | Ø5 mm |
| Stroke | 30 mm |
| Acting type | Single acting, push type (spring return) |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Return | Return spring (push by air) |
| Max standard stroke | Up to 60 mm |
The spring holds the rod retracted; applying air pushes the rod out, and removing air lets the spring return it. Forces below are the NET spring-deducted values from the AirTAC thrust table. Confirm against the product label before installation.
Net Push Force (Ø12mm)
| Pressure | Net push force |
|---|---|
| 0.5 MPa | 42.9 N |
| 0.7 MPa (max) | 65.5 N |
These are the usable push forces after the return spring is subtracted, taken directly from the AirTAC single-acting thrust table. Minimum operating pressure is set by the spring, so this model needs at least the lower pressure shown to move.
Model Code: Airtac PSB Single Acting Compact Cylinder PSB12X30R
| PSB | JIS pen-size single acting, push type (spring return) mini-cylinder series. |
|---|---|
| 12 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| R / U / CB | Back cover: R axial inlet, U 90° side inlet, CB double clevis (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PB (double acting), PTB (single-acting pull), PBD (double rod), PBR (front-mount).
Where the Airtac PSB Single Acting Compact Cylinder PSB12X30R Is Used
Part Ejection
Uses the spring-return push to eject machined components from a CNC fixture, ensuring the rod safely retracts if compressed air drops.
Flap Sealing
Deploys a 30 mm stroke to hold carton flaps during adhesive application, relying on the fail-safe retract to clear the packaging line.
Diverter Gate
Acts as a compact diverter on a conveyor system, pushing lightweight items onto a secondary track with a safe vertical lift capacity of about 2.2 kg.
Is the Airtac PSB Single Acting Compact Cylinder PSB12X30R the Right Cylinder?
This 12 mm bore generates 42.9 N net push at 0.5 MPa. Stepping down to a 10 mm bore yields 29.8 N, while moving up to a 16 mm bore provides 74.8 N. The 30 mm stroke fits well within the 60 mm single-acting limit. Confirm your ordering essentials: bore, stroke, no magnet, R axial cover, and required mount.
The Ø5 mm rod handles coaxial thrust but is slender over longer strokes; add an external linear bearing for off-axis loads. The fixed TPU bumper only decelerates the final few millimeters, so meter-out the exhaust or add an external shock absorber when cycling real tooling mass at higher speeds.
Quick checklist
- ✓ Net push force at your working pressure
- ✓ Only one air line / solenoid needed
- ✓ Fail-safe retract on air loss
- ✓ Magnet (S) for sensors?
- ✓ Stroke ≤ 60 mm (single-acting limit)
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 0.7 MPa operating pressure.
- check Allow for spring force in the stroke direction.
- check Do not add an external return mechanism.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
Airtac PSB Single Acting Compact Cylinder PSB12X30R FAQ
It provides 42.9 N of net push at 0.5 MPa and 65.5 N at 0.7 MPa maximum. Because the internal return spring opposes the air stroke, a minimum of 0.2 MPa is required before the rod extends.
Air enters one M5x0.8 port to extend the rod, and exhausting the air lets the spring retract it. It uses a fixed TPU bumper at each end to decelerate the last few millimeters of travel, which is not adjustable.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PSB Pen-Size Cylinders
Request a Quote for Airtac PSB Single Acting Compact Cylinder PSB12X30R
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.