Airtac PSB Single Acting Compact Cylinder PSB16X10R
The AirTAC Airtac PSB Single Acting Compact Cylinder PSB16X10R is a single acting, push type (spring return) pen-size mini cylinder with a Ø16mm bore and 10mm stroke. A single air port drives the push stroke; the built-in return spring resets the rod when air is released, so only one solenoid line is needed.
- BoreØ16 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typePush, single acting
- Rod threadM10×1.0
- ReturnSpring
About the Airtac PSB Single Acting Compact Cylinder PSB16X10R
The AirTAC PSB16X10R is a JIS pen-size single-acting push cylinder with a 10 mm stroke. Air entering the single M5x0.8 axial port extends the Ø5 mm rod, while an internal spring retracts it upon exhaust release. This fail-safe design ensures the rod returns home if air pressure drops, making it ideal for clamp-release and part-eject tasks. It delivers 74.8 N of net push at 0.5 MPa.
Built with a SUS304 stainless barrel and slim body, it fits tight jigs and light end-of-arm tooling. A fixed TPU bumper decelerates the stroke at each end. For practical sizing, plan for a safe working load of about 45 N, which accounts for seal friction and smooth travel at 60 percent of the rated force.
Airtac PSB Single Acting Compact Cylinder PSB16X10R Technical Specifications
| Model | Airtac PSB Single Acting Compact Cylinder PSB16X10R |
|---|---|
| Series | PSB JIS pen-size mini cylinder |
| Bore size | Ø16 mm |
| Rod diameter | Ø5 mm |
| Stroke | 10 mm |
| Acting type | Single acting, push type (spring return) |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Return | Return spring (push by air) |
| Max standard stroke | Up to 60 mm |
The spring holds the rod retracted; applying air pushes the rod out, and removing air lets the spring return it. Forces below are the NET spring-deducted values from the AirTAC thrust table. Confirm against the product label before installation.
Net Push Force (Ø16mm)
| Pressure | Net push force |
|---|---|
| 0.5 MPa | 74.8 N |
| 0.7 MPa (max) | 115.0 N |
These are the usable push forces after the return spring is subtracted, taken directly from the AirTAC single-acting thrust table. Minimum operating pressure is set by the spring, so this model needs at least the lower pressure shown to move.
Model Code: Airtac PSB Single Acting Compact Cylinder PSB16X10R
| PSB | JIS pen-size single acting, push type (spring return) mini-cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| R / U / CB | Back cover: R axial inlet, U 90° side inlet, CB double clevis (bore-dependent). |
Mounting accessories: LB, FA, CJ. Related PB-family variants: PB (double acting), PTB (single-acting pull), PBD (double rod), PBR (front-mount).
Where the Airtac PSB Single Acting Compact Cylinder PSB16X10R Is Used
Stamping Ejector
Pushes formed metal parts out of a press die using 74.8 N net force, with the spring safely pulling the rod back to clear the tooling on air loss.
Package Diverter
Acts as a compact routing gate on a packaging line, extending to push cartons onto a side track and retracting to let main flow pass.
Clamp Release
Holds a workpiece under pneumatic pressure during machining, then automatically releases the part when air is exhausted for safe unloading.
Is the Airtac PSB Single Acting Compact Cylinder PSB16X10R the Right Cylinder?
This 16 mm bore provides 74.8 N net push at 0.5 MPa (115 N at the 0.7 MPa maximum). If you need less force, the 12 mm bore offers 42.9 N at 0.5 MPa. Because 16 mm is the largest standard size, moving up requires a different body series. The internal return spring sets a 0.2 MPa minimum pressure before motion begins.
Confirm your ordering essentials: 16 mm bore, 10 mm stroke, no magnet, R axial inlet, and standard mounting. The thin Ø5 mm rod handles coaxial thrust well, but over long strokes or off-axis loads you should add an external guide or linear bearing to prevent side load damage.
Quick checklist
- ✓ Net push force at your working pressure
- ✓ Only one air line / solenoid needed
- ✓ Fail-safe retract on air loss
- ✓ Magnet (S) for sensors?
- ✓ Stroke ≤ 60 mm (single-acting limit)
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 0.7 MPa operating pressure.
- check Allow for spring force in the stroke direction.
- check Do not add an external return mechanism.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
Airtac PSB Single Acting Compact Cylinder PSB16X10R FAQ
The net push force is 74.8 N at 0.5 MPa and 115 N at the 0.7 MPa maximum. The internal spring requires a minimum of 0.2 MPa before the rod extends. If air loss occurs, the spring ensures the rod fails-safe to the retracted position.
This model uses a fixed TPU bumper at each end to decelerate the last few millimeters of travel; it is not an adjustable shock absorber. At higher speeds with heavy tooling mass, meter-out the exhaust or add an external shock absorber. This unit has no sensor magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PSB Pen-Size Cylinders
Request a Quote for Airtac PSB Single Acting Compact Cylinder PSB16X10R
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.