The AirTAC AirTAC SAI200X110 ISO 15552 Cylinder | 200mm Bore is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 110mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SAI200X110 is a heavy-duty double-acting pneumatic cylinder built to the ISO 15552 profile-barrel standard. It delivers a substantial push force of 15708 N at 0.5 MPa, making it well-suited for high-tonnage pressing, lifting, and clamping operations over its 110 mm stroke. The extruded aluminum barrel omits tie-rods for a clean exterior while maintaining strict dimensional interchangeability with other ISO 15552 units.
This configuration features a standard carbon steel piston rod and PT tapered port threads. Because it lacks the -S magnet option, it is optimized for pure actuation rather than electronic position sensing. For environments requiring elevated thermal resistance, the base TPU seals can be swapped for Viton (H) or NBR (N) alternatives.
| Model | AirTAC SAI200X110 ISO 15552 Cylinder | 200mm Bore |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides the 15708 N push force required to operate mechanical stamping dies and form thick gauge materials.
Secures large mold halves with extreme rigidity during heavy industrial plastic injection molding cycles.
Acts as a robust pneumatic actuator feeding heavy billets or raw stock into large-scale hydraulic presses.
Select this 200 mm bore when 160 mm (9425 N pull at 0.5 MPa) cannot generate the required thrust. The 110 mm stroke provides ample travel for heavy industrial forming without the excessive rod overhang found in longer strokes. Operating speed for this bore is 30-500 mm/s.
If the machinery requires the load to be physically held in place during a complete air pressure loss, a standard SAI will not suffice as the piston will drift. In such safety-critical setups, specify the BSAI clamp-lock variant or integrate an external pilot-operated check valve. Mounting can be achieved using TC trunnion or FA flange accessories to match your ISO 15552 interface.
Quick checklist
At a 0.5 MPa operating pressure, this 200 mm bore cylinder generates 15708 N of push force and 15080 N of pull force. The theoretical maximum force at 1.0 MPa is 3204 kgf.
Yes, the SAI200X110 is dimensionally interchangeable per the ISO 15552 mounting interface. You can directly swap it with other ISO 15552 profile cylinders of the same bore and stroke, provided your port and rod threading match.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.