The AirTAC AirTAC SAI200X195 ISO 15552 Cylinder | 200mm Bore is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 195mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SAI200X195 is a double-acting ISO 15552 profile cylinder engineered for heavy-duty industrial automation. Delivering a substantial push force of 15708 N at 0.5 MPa, this 200 mm bore unit utilizes a 195 mm stroke to power massive loads. Its extruded aluminum barrel design omits tie-rods, providing a clean profile that drops directly into standardized ISO 15552 mounting interfaces.
Built for demanding environments, this specific configuration incorporates a SUS304 stainless steel piston rod for superior corrosion resistance. Fluid routing is handled by PT tapered G3/4 ports. Because a magnet is not specified, this variant operates without integrated sensor tracks; if position detection is required, an -S magnet option must be specified for CMSE or DMSE switches.
| Model | AirTAC SAI200X195 ISO 15552 Cylinder | 200mm Bore |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides the robust 15708 N push force required to actuate large mechanical stamping presses and form thick gauge metal components.
Drives massive diverter gates and heavy-duty automated sorting mechanisms in high-throughput manufacturing facilities.
Lifts and positions fully loaded industrial pallets on assembly lines where extreme thrust and rigid structural support are mandatory.
Selecting this 200 mm bore cylinder is appropriate when application thrust requirements exceed the 10053 N generated by the neighboring 160 mm bore at 0.5 MPa. The 195 mm stroke provides ample extension for large presses or heavy material handling. Operating speed for this bore size ranges from 30-500 mm/s, regulated by adjustable air cushions at both ends measuring 50 mm.
For strokes of 195 mm, side-load risks are moderate but manageable; always ensure rigid mounting using FA flanges or LB foot brackets to prevent rod-bearing bending. Note that a standard SAI cylinder relies entirely on continuous air pressure to maintain its position. If the pneumatic supply drops, the load will drift. For fail-safe holding of these extreme loads, specify the SAIL variant with an air-released lock or the BSAI bidirectional clamp-lock.
Quick checklist
At 0.5 MPa operating pressure, this 200 mm bore cylinder generates a push force of 15708 N and a pull force of 15080 N. The theoretical maximum force at 1.0 MPa is 3204 kgf.
Yes, the SAI200X195 is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing machinery setups designed for ISO 15552 profile cylinders, matching the standard mounting dimensions and G3/4 port locations.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.