The AirTAC AirTAC SAI200X200 ISO 15552 Cylinder | 200mm Bore is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 200mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SAI200X200 is a double-acting ISO 15552 profile cylinder engineered for heavy-duty industrial handling. It generates a substantial 15708 N of push force and 15080 N of pull force at 0.5 MPa, making it well-suited for moving massive payloads through its 200 mm stroke. The extruded aluminum barrel design omits tie rods, providing a clean exterior that drops directly into standardized ISO 15552 mounting footprints.
This specific configuration utilizes a standard carbon steel piston rod and PT tapered G3/4 ports for high-volume air flow. Because a magnet is not specified, it operates without integrated position sensing; add the -S option if your control system requires CMSE or DMSE switches. For environments requiring exceptional heat resistance, the standard TPU seals can be swapped for Viton (H) or NBR (N) alternatives.
| Model | AirTAC SAI200X200 ISO 15552 Cylinder | 200mm Bore |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides the high clamping force necessary to hold thick steel plates securely inside large industrial stamping presses.
Drives massive core-setting and mold-handling mechanisms where extreme push force and robust construction are required.
Actuates heavy-duty diverters on mining or aggregate conveyor belts to route dense, high-volume materials efficiently.
Selecting the SAI200X200 is appropriate when application thrust requirements exceed the 10053 N push force of the neighboring 160 mm bore at 0.5 MPa. Operating speed spans 30-500 mm/s, regulated by adjustable air cushions at both ends to decelerate the heavy piston smoothly. Note that the standard cushion decelerates the rod near stroke end but does not lock or hold the load; if your machinery loses pneumatic pressure, the piston will drift. For suspended loads requiring fail-safe holding, specify the SAIL variant with an air-released lock or the BSAI bidirectional clamp-lock.
As a true ISO 15552 profile cylinder, this model provides a dimensionally interchangeable replacement for other 200 mm bore standard cylinders. To match existing plumbing, the fluid port utilizes a PT tapered G3/4 thread. Ensure your mounting setup accommodates the 200 mm stroke and utilizes compatible accessories such as FA flanges or TC trunnion brackets.
Quick checklist
At an operating pressure of 0.5 MPa, the SAI200X200 generates 15708 N of push force and 15080 N of pull force. If pressure is increased to 0.7 MPa, the push force rises to 21991 N.
Yes. The SAI200X200 is a genuine ISO 15552 profile cylinder, meaning its mounting dimensions are fully interchangeable with other standard 200 mm bore ISO 15552 cylinders. It is not a tie-rod design, ensuring a clean profile.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.