The AirTAC AirTAC SAI200X200-S ISO 15552 Cylinder | 200mm Bore is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 200mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SAI200X200-S is a robust double-acting profile cylinder designed to the ISO 15552 standard. Operating at 0.5 MPa, it generates a substantial 15708 N of push force and 15080 N of pull force, making it well-suited for heavy-duty pressing and lifting tasks over its 200 mm stroke. The extruded aluminum barrel eliminates tie-rods, providing a clean exterior and high structural rigidity.
This specific configuration includes a standard carbon steel piston rod and a built-in magnet (-S) for use with CMSE and DMSE series reed switches. The barrel features sensor grooves on both sides for flexible switch mounting. Fluid and air connections use PT tapered port threads, and the cylinder includes adjustable air cushions at both ends to dampen impact at high operating speeds.
| Model | AirTAC SAI200X200-S ISO 15552 Cylinder | 200mm Bore |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides the immense linear force required for metal forming, riveting, and heavy assembly presses.
Secures large industrial molds and heavy tooling fixtures securely during manufacturing operations.
Actuates massive bulkhead doors, hydraulic damper gates, and heavy industrial lifting platforms.
With a massive 3204 kgf theoretical maximum force at 1.0 MPa, this 200 mm bore cylinder handles extreme loads. If the application requires less force, stepping down to the 160 mm bore is recommended, which yields 10053 N of push force at 0.5 MPa. Because this model features a 200 mm stroke, side-load bending moments on the rod bearing are minimal, though external guides are always advised for heavy offset loads.
This SAI model serves as a direct, dimensionally interchangeable drop-in replacement for any ISO 15552 profile cylinder. To mount it, utilize standard ISO accessories like FA/FB flanges or TC trunnions. If your machinery needs to hold a load vertically without continuous air pressure, this standard cylinder will drift; you must specify an SAIL air-released lock variant or use an external pilot-operated check valve.
Quick checklist
At an operating pressure of 0.5 MPa, the SAI200X200-S cylinder delivers a push force of 15708 N and a pull force of 15080 N. The theoretical maximum force at 1.0 MPa is 3204 kgf.
Yes, the SAI200X200-S is a genuine ISO 15552 profile cylinder, making its mounting dimensions fully interchangeable with other ISO 15552 cylinders. It uses a G3/4 port and M36x2 rod thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.