The AirTAC AirTAC SAI200X240 ISO 15552 Cylinder | 200mm Bore is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 240mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SAI200X240 is a double-acting ISO 15552 profile cylinder featuring a 200mm bore and 240mm stroke. It delivers a substantial push force of 15708 N and a pull force of 15080 N at 0.5 MPa, making it well-suited for heavy-duty industrial pressing and lifting. The extruded aluminum barrel design omits tie rods, providing a clean exterior that complies with standard ISO 15552 mounting dimensions.
This model features a standard carbon steel piston rod and utilizes NBR seals for reliable pneumatic operation. The barrel incorporates sensor grooves on both sides for direct mounting of CMSE or DMSE switches. If your application requires holding a load without continuous air pressure, consider the SAIL or BSAI variants, as the standard adjustable air cushions only decelerate the piston at stroke ends.
| Model | AirTAC SAI200X240 ISO 15552 Cylinder | 200mm Bore |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides the immense 15708 N push force required for stamping, bending, and forming thick metal sheets in automotive and heavy machinery production.
Ideal for powering large pneumatic presses where a 240mm stroke and massive force are needed to assemble oversized industrial components.
Used to actuate large ejection mechanisms on heavy molding equipment, relying on the 200mm bore to generate reliable extraction force.
Selecting the SAI200X240 is appropriate when your application demands maximum thrust, offering 15708 N at 0.5 MPa. If this exceeds your requirements, stepping down to the 160mm bore reduces the push force to 10053 N while saving space. The 240mm stroke is well within the 1500mm maximum standard stroke for this bore.
For this 240mm stroke, side load management is less critical than on longer strokes, but ensuring axial alignment remains vital to prevent premature rod bearing wear. As a true ISO 15552 profile cylinder, this unit serves as a direct dimensional replacement for other ISO 15552 cylinders. It features a PT tapered G3/4 port, uses standard carbon steel rod material, and supports mounting accessories like FA flanges or TC trunnions. A magnet for sensors is not included in this configuration.
Quick checklist
At 0.5 MPa operating pressure, the SAI200X240 generates a push force of 15708 N and a pull force of 15080 N. At 0.7 MPa, the push force increases to 21991 N.
Yes, the SAI200X240 is a genuine ISO 15552 profile cylinder. It is dimensionally interchangeable with other ISO 15552 standard cylinders, featuring a G3/4 port and standard mounting interfaces.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.