The AirTAC AirTAC SAI200X600 ISO 15552 Cylinder | 200mm Bore is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 600mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SAI200X600 is a heavy-duty double-acting profile cylinder delivering a substantial 15708 N of push force at 0.5 MPa. Built to exact ISO 15552 dimensional standards, this 200 mm bore unit utilizes a 600 mm stroke to execute massive workpiece actuation across large-scale industrial machinery.
This specific configuration incorporates a SUS420J2 stainless steel piston rod (material code A) for superior corrosion and wear resistance in harsh environments. Fluid routing is handled by PT tapered threads, and operators can integrate position feedback by adding a magnet and CMSE or DMSE switches into the extruded aluminum barrel's dual sensor grooves.
| Model | AirTAC SAI200X600 ISO 15552 Cylinder | 200mm Bore |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides the immense 15708 N push force required to actuate large mechanical stamping presses and form thick-gauge steel components.
Drives oversized welding fixtures and positions heavy chassis sub-assemblies along a 600 mm travel distance on automated lines.
Shifts massive loads of raw aggregate or heavy pallets across wide conveyor belts where standard 100 mm cylinders lack the necessary thrust.
Selecting this 200 mm bore unit is appropriate when loads exceed the 10053 N push capacity of the 160 mm variant but do not justify a custom multi-circuit solution. If the 600 mm stroke provides unnecessary travel, stepping down to a 500 mm standard stroke optimizes cycle time and reduces overall cylinder mass.
Because the 600 mm stroke generates significant extension leverage, unsupported rod bending under side loads becomes a primary mechanical concern. Engineers must implement external guide rails or select a guided cylinder to prevent rod-bearing destruction. Note that the adjustable air cushions at both ends only decelerate the piston near stroke limits; they do not lock or hold a load. If your process requires vertical position holding without live air pressure, specify an SAIL locking variant or a BSAI clamp-lock model.
Quick checklist
At a standard 0.5 MPa operating pressure, this 200 mm bore cylinder generates 15708 N of push force and 15080 N of pull force. It achieves a maximum theoretical force of 3204 kgf at 1.0 MPa.
Yes, the SAI200X600 is dimensionally interchangeable per ISO 15552 mounting interface standards, allowing it to serve as a drop-in replacement for other ISO 15552 profile cylinders of the same bore and stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.