Airtac SAID100 Double Rod Cylinder SAID100AX10
The AirTAC Airtac SAID100 Double Rod Cylinder SAID100AX10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 10mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke10 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID100 Double Rod Cylinder SAID100AX10
The AirTAC SAID100X10 is a double-acting, double-rod ISO 15552 profile cylinder engineered for applications requiring equal force and speed in both directions. Because a rod extends from both end covers, the annulus area is identical on extend and retract, yielding a symmetrical thrust of 3681 N at 0.5 MPa. This through-rod configuration is ideal for driving twin mechanisms or mounting rear-position flags.
This specific configuration features a SUS420J2 stainless steel rod for enhanced corrosion resistance and utilizes PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting, while the adjustable air cushions at both ends absorb impact energy on this short 10 mm stroke.
Airtac SAID100 Double Rod Cylinder SAID100AX10 Technical Specifications
| Model | Airtac SAID100 Double Rod Cylinder SAID100AX10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID100 Double Rod Cylinder SAID100AX10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID100 Double Rod Cylinder SAID100AX10 Is Used
Symmetric Force Transfer
Drives a workpiece from both ends simultaneously, ensuring perfectly balanced 3681 N thrust and consistent velocity for precision pressing tasks.
Anti-Rotation Slides
The twin-rod geometry prevents mechanical rotation during the 10 mm stroke, maintaining strict alignment for precision assembly tooling.
Twin-Station Actuation
Uses the front rod end to drive the primary operation while the rear rod end actuates a secondary mechanism or limit flag simultaneously.
Is the Airtac SAID100 Double Rod Cylinder SAID100AX10 the Right Cylinder?
Selecting this 100 mm bore double-rod cylinder is optimal when your mechanism requires 3681 N of push and pull force simultaneously, stepping up from a 80 mm bore that provides 2268 N at 0.5 MPa. A twin-rod design is chosen over a single-rod SAI when the application demands dual-side guidance, anti-rotation stability, or rear-rod cam actuation. To match this cylinder for an ISO 15552 drop-in replacement, specify the 100 mm bore, 10 mm stroke, G1/2 port, and desired mounting accessory from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Note that a plain SAID cylinder does not hold its position if air pressure is lost; the piston will drift. If your short-stroke clamping application requires dead-stop holding without live pressure, consider an external rod lock or the BSAID clamp-lock variant. Because no magnet is specified, position sensing requires external methods rather than embedded CMSE or DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID100 Double Rod Cylinder SAID100AX10 FAQ
The SAID100X10 provides equal force in both extend and retract directions due to its double-rod design. It delivers 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa.
Yes, it is dimensionally interchangeable per ISO 15552. It supports a specific subset of mounts including Basic, FA, LB, TC, FTC, TCM1, and TCM2. It omits FB, CA, CB, and CR mounts which are for single-rod variants.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAID100 Double Rod Cylinder SAID100AX10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.