Airtac SAID100 Double Rod Cylinder SAID100AX100
The AirTAC Airtac SAID100 Double Rod Cylinder SAID100AX100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 100mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke100 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID100 Double Rod Cylinder SAID100AX100
The AirTAC SAID100X100 is a double-acting, double-rod ISO 15552 profile cylinder engineered for symmetric actuation. A single piston drives a rod out of both end covers, yielding identical extend and retract forces. It generates 3681 N of thrust each way at 0.5 MPa, scaling up to 6626 N at 0.9 MPa.
This unit is configured with a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and features PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches, though this specific SKU is supplied without a magnet.
Airtac SAID100 Double Rod Cylinder SAID100AX100 Technical Specifications
| Model | Airtac SAID100 Double Rod Cylinder SAID100AX100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID100 Double Rod Cylinder SAID100AX100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID100 Double Rod Cylinder SAID100AX100 Is Used
Symmetric Force Transfer
Drives two opposing workstations simultaneously with equal 3681 N force, ensuring perfectly balanced movement without needing two separate cylinders.
Anti-Rotation Slides
The dual-rod architecture prevents piston rotation, providing precise linear guidance for heavy tooling mounts that cannot tolerate angular drift.
Through-Rod Sensing
Mounts a cam or position flag on the rear rod end to trigger external limit switches, keeping the primary work area clear of sensor obstructions.
Is the Airtac SAID100 Double Rod Cylinder SAID100AX100 the Right Cylinder?
Select this 100 mm bore when an application demands 3681 N of force in both directions, such as synchronizing two mechanisms from one actuator. If your payload is lighter, stepping down to an 80 mm bore reduces the both-way force to 2268 N at 0.5 MPa. Conversely, heavier loads require the 125 mm variant.
The twin-rod design inherently resists torsional rotation better than a single-rod SAI cylinder, making it ideal for guided slides. Remember that the adjustable air cushions only decelerate the piston near stroke end; they do not hold position. If air pressure drops, the load will drift unless you add an external rod lock or use a BSAID clamp-lock variant. As a true ISO 15552 profile cylinder, it offers drop-in dimensional interchangeability with other standard double-rod cylinders, utilizing a G1/2 port and mounting accessories from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID100 Double Rod Cylinder SAID100AX100 FAQ
Because it is a double-rod cylinder, the effective piston area is identical on both sides. It outputs 3681 N in both extend and retract directions at 0.5 MPa, and 6626 N at 0.9 MPa.
Yes, it is dimensionally interchangeable per ISO 15552. It is compatible with the SAID mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets, but omits FB, CA, CB, and CR styles.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAID100 Double Rod Cylinder SAID100AX100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.