Airtac SAID100 Double Rod Cylinder SAID100AX105
The AirTAC Airtac SAID100 Double Rod Cylinder SAID100AX105 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 105mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke105 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID100 Double Rod Cylinder SAID100AX105
The AirTAC SAID100X105 is a double-acting, double-rod profile cylinder fully dimensionally interchangeable per ISO 15552. A single piston drives a rod out of both end covers, yielding equal extend and retract forces of 3681 N at 0.5 MPa. This symmetric thrust makes it ideal for twin-station actuation and through-rod sensing setups.
This unit features a SUS420J2 stainless steel rod for corrosion resistance and PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac SAID100 Double Rod Cylinder SAID100AX105 Technical Specifications
| Model | Airtac SAID100 Double Rod Cylinder SAID100AX105 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID100 Double Rod Cylinder SAID100AX105
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID100 Double Rod Cylinder SAID100AX105 Is Used
Symmetric Force Transfer
Provides identical push and pull forces for machinery requiring perfectly balanced actuation speeds and thrust in both directions.
Anti-Rotation Slides
The twin-rod construction prevents piston rotation, guiding loads precisely where a single rod would twist under offset moments.
Rear Cam Actuation
Uses the protruding rear rod end to drive a secondary mechanism or trigger a mechanical limit flag independently of the front tool.
Is the Airtac SAID100 Double Rod Cylinder SAID100AX105 the Right Cylinder?
Choose this 100 mm bore when an application requires substantial equal both-way thrust (3681 N at 0.5 MPa) that a smaller neighbor like the SAID80 (2268 N) cannot provide. The twin-rod design is selected over a single-rod SAI when the mechanism needs dual-side guidance, anti-rotation stability, or a rear rod end to mount a secondary cam. Note that this cylinder does not hold its load when air pressure is lost; for fail-safe holding, consider an external rod lock or the BSAID clamp-lock variant.
Configuration matches: 100 mm bore, 105 mm stroke, PT ports, and no magnet. It serves as a drop-in replacement for other ISO 15552 double-rod cylinders. The 105 mm stroke is below the 300 mm threshold, so standard rod-bearing side-load limits apply without needing an external guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID100 Double Rod Cylinder SAID100AX105 FAQ
Because the rod area is subtracted on both sides, the SAID100X105 generates an equal force of 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa for both extend and retract directions.
Yes, it is dimensionally interchangeable per ISO 15552. It supports a specific mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, but omits the FB, CA, CB, and CR brackets found on single-rod variants.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAID100 Double Rod Cylinder SAID100AX105
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.