Airtac SAID100 Double Rod Cylinder SAID100AX130
The AirTAC Airtac SAID100 Double Rod Cylinder SAID100AX130 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 130mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke130 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID100 Double Rod Cylinder SAID100AX130
The AirTAC SAID100X130 is a double-acting, double-rod ISO 15552 profile cylinder engineered for applications demanding equal force and speed in both directions. Because a rod extends from both end covers, the annulus area is identical on extend and retract, yielding a consistent 3681N of thrust each way at 0.5 MPa. The 100mm bore utilizes a G1/2 port to ensure adequate airflow for its 30-800mm/s speed range.
This specific configuration features a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance over standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount position flags or CMSE / DMSE switches on either end to track the twin rod extensions.
Airtac SAID100 Double Rod Cylinder SAID100AX130 Technical Specifications
| Model | Airtac SAID100 Double Rod Cylinder SAID100AX130 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID100 Double Rod Cylinder SAID100AX130
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID100 Double Rod Cylinder SAID100AX130 Is Used
Symmetric Force Transfer
Ideal for pushing and pulling identical loads where equal 3681N force and matching cycle speeds in both directions are critical for process stability.
Anti-Rotation Slides
The twin-rod design naturally resists torsional deflection, providing guided linear motion without needing external guide rails for lighter loads.
Rear-Rod Cam Actuation
Mount the primary workpiece on the front rod and use the rear protrusion to trigger external limit valves or mechanical cams simultaneously.
Is the Airtac SAID100 Double Rod Cylinder SAID100AX130 the Right Cylinder?
Selecting this 100mm bore makes sense when your mechanism requires symmetric actuation, such as driving a load on the front rod while using the rear rod for anti-rotation guidance or cam actuation. If your project needs less force, stepping down to the 80mm bore provides 2268N each way at 0.5 MPa; stepping up to the 125mm bore yields 5734N. Remember that a plain double-rod cylinder does not hold position unpowered—use a SAIL or BSAID variant if pneumatic locking is required.
To match this model for an ISO 15552 drop-in replacement, confirm the 130mm stroke, G1/2 port size, PT thread type, and your required mounting accessory from the SAID subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that FB, CA, CB, and CR mounts are exclusive to the single-rod SAI series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID100 Double Rod Cylinder SAID100AX130 FAQ
Because it is a double-rod cylinder, the effective piston area is identical on both sides. It provides an equal force of 3681N in both extend and retract directions at 0.5 MPa, and 5153N at 0.7 MPa.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. However, the SAID series only supports the Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts; it omits the FB, CA, CB, and CR styles found on single-rod versions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAID100 Double Rod Cylinder SAID100AX130
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.