Airtac SAID100 Double Rod Cylinder SAID100AX150
The AirTAC Airtac SAID100 Double Rod Cylinder SAID100AX150 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 150mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke150 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID100 Double Rod Cylinder SAID100AX150
The AirTAC SAID100X150 is a double-acting, double-rod ISO 15552 profile cylinder engineered for symmetric actuation. Because a piston rod exits both end covers, the effective annular area is identical on extend and retract. This yields exactly 3681 N of output force at 0.5 MPa in either direction, ensuring perfectly balanced motion for demanding transfer tasks.
The extruded aluminum barrel features dual-side sensor grooves for flexible switch mounting. The rod material is SUS420J2 stainless steel (code A) for enhanced corrosion resistance, and the PT tapered port thread guarantees a robust pneumatic connection. The rear rod end can simultaneously drive a secondary mechanism or carry a position flag.
Airtac SAID100 Double Rod Cylinder SAID100AX150 Technical Specifications
| Model | Airtac SAID100 Double Rod Cylinder SAID100AX150 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID100 Double Rod Cylinder SAID100AX150
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID100 Double Rod Cylinder SAID100AX150 Is Used
Symmetric Transfer
Drives a workpiece across a station with identical push and pull force, preventing speed variations during bidirectional transfer.
Anti-Rotation Slides
The twin-rod architecture keeps the attached tool plate guided against rotational torque, ensuring precise linear movement.
Rear-rod Sensing
Mounts a cam or position flag on the rear rod end to trigger external sensors without interfering with the primary work area.
Is the Airtac SAID100 Double Rod Cylinder SAID100AX150 the Right Cylinder?
Select this 100 mm bore when an application demands 3681 N of thrust both ways and a 150 mm stroke. If your load requirement is lower, stepping down to the 80 mm bore provides 2268 N at 0.5 MPa, saving space. Choose the SAID twin-rod design over a single-rod SAI when you need dual-side guidance, anti-rotation stability, or rear-rod sensing capabilities. Mounting options include the Basic, FA, LB, TC, FTC, TCM1, and TCM2 accessory set, omitting the FB, CA, CB, and CR variants used on single-rod cylinders. Note that the adjustable air cushions decelerate the piston near stroke ends but do not hold a load; if position holding without live pressure is required, consider the SAIL or BSAID series. This cylinder is dimensionally interchangeable per ISO 15552.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID100 Double Rod Cylinder SAID100AX150 FAQ
It provides 3681 N of force at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. Because it is a double-rod cylinder, this pull-side force figure is identical for both the extend and retract directions.
Yes, the SAID100X150 is dimensionally interchangeable per ISO 15552. It serves as a drop-in replacement for other ISO 15552 double-rod profile cylinders, using the standard PT G1/2 port and standard mounting interfaces.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAID100 Double Rod Cylinder SAID100AX150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.