Airtac SAID100 Double Rod Cylinder SAID100AX425S
The AirTAC Airtac SAID100 Double Rod Cylinder SAID100AX425S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 425mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke425 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID100 Double Rod Cylinder SAID100AX425S
The AirTAC SAID100X425-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100 mm bore and 425 mm stroke. Because the piston rod exits both end covers, the effective annulus area is identical on extend and retract. This provides a perfectly balanced output of 3681 N each way at 0.5 MPa, ensuring symmetric force and speed throughout the motion cycle.
Equipped with a magnet (-S) for position sensing, this variant integrates seamlessly with AirTAC CMSE reed and DMSE solid-state switches mounted in the dual-side sensor grooves. The rod is constructed from SUS420J2 stainless steel (option A) for enhanced corrosion resistance, while fluid connections use PT tapered threads (G1/2). Adjustable air cushions at both ends decelerate the piston near stroke ends, though note this cushioning does not lock or hold the load if air pressure is lost.
Airtac SAID100 Double Rod Cylinder SAID100AX425S Technical Specifications
| Model | Airtac SAID100 Double Rod Cylinder SAID100AX425S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID100 Double Rod Cylinder SAID100AX425S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID100 Double Rod Cylinder SAID100AX425S Is Used
Symmetric Transfer Units
Drives automated shuttle systems where the equal 3681 N extend and retract forces at 0.5 MPa ensure perfectly balanced acceleration and deceleration of heavy pallets without speed variations.
Anti-Rotation Slides
The twin-rod design inherently resists torsional twist, providing precise linear guidance for machining fixtures where a single rod would allow unwanted rotational play.
Dual-Station Tooling
Mounts the primary workpiece on the front rod end and a secondary cam or position flag on the rear protruding rod to actuate external limit switches during the stroke cycle.
Is the Airtac SAID100 Double Rod Cylinder SAID100AX425S the Right Cylinder?
Choose this 100 mm bore over the smaller 80 mm (2268 N at 0.5 MPa) when your application demands higher bidirectional thrust, or step up further to the 125 mm bore (5734 N) for very heavy transfer duties. The double-rod architecture is specifically selected over a single-rod SAI when the mechanism requires superior anti-rotation guidance, twin-station actuation, or a rear-rod position flag.
As a true ISO 15552 extruded aluminum profile cylinder, it serves as a drop-in replacement for other ISO 15552 double-rod cylinders. For a 425 mm stroke, the extended unsupported rod length increases side-load risks; utilize an external guide rail to prevent rod-bearing bending. Remember that a standard SAID does not hold position upon air loss—consider a BSAID clamp-lock cylinder if dead-fall prevention is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID100 Double Rod Cylinder SAID100AX425S FAQ
Because the double-rod design has the same effective area on both sides of the piston, it generates 3681 N of force in both the extend and retract directions at 0.5 MPa, and 5153 N at 0.7 MPa.
Yes, the SAID100X425-S is built to the ISO 15552 dimensional standard, making it a drop-in replacement for other ISO 15552 profile double-rod cylinders, provided you use the PT G1/2 port and standard mounting interface.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAID100 Double Rod Cylinder SAID100AX425S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.