Airtac SAID100 Double Rod Cylinder SAID100AX80S
The AirTAC Airtac SAID100 Double Rod Cylinder SAID100AX80S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 80mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke80 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID100 Double Rod Cylinder SAID100AX80S
The AirTAC SAID100X80-S is a double-acting, double-rod ISO 15552 profile cylinder. A single piston drives a rod out of BOTH end covers, yielding equal extend and retract forces. It delivers 3681 N of thrust in each direction at 0.5 MPa. Because the annulus area is identical on both faces, travel speed remains perfectly symmetric.
This specific configuration features a SUS420J2 stainless steel rod (material code A) for superior corrosion resistance. The integrated magnet (-S) pairs directly with AirTAC CMSE reed and DMSE solid-state sensors, which ride cleanly in the extruded aluminum barrel's dual-side grooves. PT tapered ports (G1/2) provide a tight pneumatic seal.
Airtac SAID100 Double Rod Cylinder SAID100AX80S Technical Specifications
| Model | Airtac SAID100 Double Rod Cylinder SAID100AX80S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID100 Double Rod Cylinder SAID100AX80S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID100 Double Rod Cylinder SAID100AX80S Is Used
Symmetric Transfer
Drives a gripper on the front rod and a synchronized ejector on the rear rod, utilizing equal 3681 N force for perfectly balanced high-speed part transfer.
Anti-Rotation Slide
The twin-rod architecture prevents mechanical twisting under offset loads, keeping heavy tooling plates guided straight without external rails.
Dual-Station Actuation
Actuates two separate mechanisms simultaneously from one piston, using the rear rod end to trigger DMSE solid-state sensors for precise cycle timing.
Is the Airtac SAID100 Double Rod Cylinder SAID100AX80S the Right Cylinder?
Choose this 100 mm bore when an application demands 3681 N of bi-directional force at 0.5 MPa. If your load requires less thrust, stepping down to a 80 mm bore drops the both-way output to 2268 N. The twin-rod layout is selected over a single-rod SAI when you need to mount a workpiece on the front rod and a position flag or cam on the rear rod, providing dual-side guidance and anti-rotation stability.
As a true ISO 15552 profile cylinder, it serves as a drop-in replacement for other ISO 15552 double-rod cylinders. It uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR accessories. Note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If position holding without live pressure is required, use a BSAID clamp-lock or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID100 Double Rod Cylinder SAID100AX80S FAQ
It provides 3681 N of force in both the extend and retract directions at 0.5 MPa. Because the rod occupies both sides of the piston, the effective area is equal both ways, meaning push and pull forces are identical.
Yes. The SAID100X80-S is dimensionally interchangeable per ISO 15552 mounting-interface dimensions, allowing it to serve as a drop-in replacement for other ISO 15552 profile double-rod cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAID100 Double Rod Cylinder SAID100AX80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.