Airtac SAID100 Double Rod Cylinder SAID100AX95
The AirTAC Airtac SAID100 Double Rod Cylinder SAID100AX95 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 95mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke95 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID100 Double Rod Cylinder SAID100AX95
The AirTAC SAID100X95 is a double-acting, double-rod profile cylinder fully dimensionally interchangeable per ISO 15552. A single piston drives a rod out of both end covers, yielding equal extend and retract forces of 3681 N at 0.5 MPa. This through-rod architecture is ideal for mounting a workpiece on one end and a position flag or cam on the other.
This 100mm bore unit features a 25mm rod made of SUS420J2 stainless steel (code A) for enhanced corrosion resistance. The extruded aluminum barrel includes sensor grooves on both sides, and while this unit lacks a magnet, the grooves readily accept AirTAC CMSE reed or DMSE electronic switches when needed. Adjustable air cushions at both ends decelerate the piston smoothly.
Airtac SAID100 Double Rod Cylinder SAID100AX95 Technical Specifications
| Model | Airtac SAID100 Double Rod Cylinder SAID100AX95 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID100 Double Rod Cylinder SAID100AX95
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID100 Double Rod Cylinder SAID100AX95 Is Used
Symmetric Force Transfer
Delivers equal push and pull forces for material handling systems that require identical clamping and release pressures in both directions.
Anti-Rotation Slides
The twin-rod design prevents piston rotation, providing precise linear guidance for sliding mechanisms and indexing units.
Through-Rod Sensing
The protruding rear rod offers a dedicated mounting point for CMSE or DMSE position flags without interfering with the primary workpiece.
Is the Airtac SAID100 Double Rod Cylinder SAID100AX95 the Right Cylinder?
Choose this 100mm bore over the 80mm option (2268 N both ways at 0.5 MPa) when your application requires higher symmetric force, or step down to a 63mm bore (1402 N) for lighter loads. A double-rod design is selected over a single-rod SAI when dual-side guidance, anti-rotation control, or rear-rod actuation is required. Keep in mind that a plain SAID does not hold its load when air is exhausted; use a SAIL or BSAID clamp-lock cylinder if position holding without live pressure is needed. This model uses PT tapered ports and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID100 Double Rod Cylinder SAID100AX95 FAQ
Because the rod occupies both sides of the piston, the effective area is identical in both directions. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa for both extend and retract strokes.
Yes, the SAID100X95 is a true ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 double-rod cylinders. It uses a PT G1/2 port and omits FB, CA, CB, and CR mounts found only on single-rod variants.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAID100 Double Rod Cylinder SAID100AX95
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.